1) steelmaking mud
炼钢红泥
2) steelmaking
炼钢
1.
Application and Improvement of ERP Production and Marketing System in the Steelmaking Production Schednle;
ERP产销系统在炼钢生产计划中的应用与改进
2.
Integrated design with CEI for steelmaking process computer;
炼钢过程计算机的“三电”一体化设计
3.
Experimental study of steelmaking with CO_2 and O_2 mixed blowing;
二氧化碳—氧气混合喷吹炼钢实验研究
3) steel making
炼钢
1.
Hierarchy Coloured Petri Net (HCPN) and application in material flow system simulation modeling for steel making and continuous casting production of Baosteel;
分层有色Petri Net(HCPN)及其在宝钢炼钢连铸生产物流系统仿真建模中的应用
2.
The mechanism of burn and scald in steel making system is analyzed to offer an accordance for reducing the accident.
分析了转炉炼钢系统灼烫伤机理,采取可行性控制措施,为减少转炉炼钢系统灼烫伤事故的发生提供依据,收到了较好效果。
3.
By increasing effective CaO content in lime and decreasing burning loss, sulfur content and impurity, the consumption of lime in steel making can be reduced remarkably.
石灰质量对炼钢用石灰消耗量有显著影响。
4) steel-making
炼钢
1.
Control of the lance position in BOF steel-making;
转炉炼钢氧枪枪位辅助控制的研究
2.
Retrospect and prospect of technological progress in steel-making over the past 50 years since WISCO being put into production;
武钢投产50年炼钢生产技术进步的回顾与展望
3.
Investigation of active lime liquation in initial slag of steel-making;
活性石灰在炼钢初渣中的熔解研究
5) steelmaking sludge
炼钢污泥
1.
This paper briefly presents a process concept of the disposal of steelmaking sludge,which is simple,steady, reliable and easy to operate.
简要介绍了消化炼钢污泥的工艺方案,此方案简单易行、稳定可靠。
2.
WT5BZ]The bench test and plant test of pelletizing with addition of steelmaking sludge were conducted under the operational condition of Jinan I&S Co.
就济钢生产条件下球团工艺中配加炼钢污泥进行了试验室和生产试验。
6) EAF steelmaking
电炉炼钢
1.
Process computer control for EAF steelmaking;
电炉炼钢过程计算机控制
2.
4 steel-making shop,the output was increased from 254 thousand tons in 2000 to 873 thousand in 2005,with the specific electricity consumption in EAF steelmaking decreased from 547 kW·h/t to 213 kW·h/t.
大冶特钢是国内有代表性的电炉炼钢企业之一,本文对该企业的一些主要工序——烧结、炼铁、炼钢和轧钢的能源、物质消耗和耗能工质消耗数据进行收集、整理、分析,基于相同的统计和计算方法,得到生产每吨产品的工序电耗、能耗以及折算的全流程(全流程包括烧结、炼铁、炼钢和轧钢4道主要工序,这里轧钢工序只选择较大的连轧厂作为代表)吨钢电耗、能耗值。
参考词条
补充资料：红泥紫砂壶
民国制壶高手俞国良作，高１０.５厘米。这红色泥料的制作、烧成难度都比较大，此为罕见的成功之作。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。