1) horizontal loading
水平加载
1.
The force resistance of powered support when horizontal loading was added under the condition of laboratory was analyzed and a horizontal loading experiment method was put forward.
对在实验室条件下进行水平加载检验时,液压支架受力情况进行了分析,提出了水平加载的试验方法。
2) loading level
加载水平
1.
Using static and dynamic creep test the static and dynamic responses of creep stiffness modulus of asphalt mixtures for AC13 and AC25 with different gradations and asphalt-aggregate ratios determined by orthogonal test design,temperatures and loading levels were researched.
15%时其影响不明显,但变化幅度较大时则影响增大;试验温度升高将迅速降低静、动态蠕变劲度模量;随加载水平增加,静态蠕变劲度模量降低但动态蠕变劲度模量增加。
3) cyclic horizontal loading
水平动加载
4) additional horizontal loading
附加水平载荷
5) level force cyclic loading
水平力循环加载
6) distribution of lateral force
水平加载方式
1.
Summarized and evaluated herein is an improved displacement-controlled pushover analysis procedure based on structural dynamics theory, which adopts adaptive distribution of lateral force and combines several modal responses of pushover analysis results to account for the contributions of higher modes.
本文在已有的研究基础上,通过一种基于位移控制的多阶振型组合的静力推覆分析,采用自适应的水平加载方式,考虑高阶振型的影响。
补充资料：自动加载下载的*.dmt材质方法
自动加载下载的*.dmt材质方法一
1、建立如下路径的文件夹：
E:\graphiclib\graphic-library\
然后把你下载的adv_materials文件夹（里面材质了）放到刚才建立的路径里，变成如下路径
E:\graphiclib\graphic-library\adv_materials
2、如图配制搜索路径
3、这样调用！点PHOTOLUX材质库
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条