说明：双击或选中下面任意单词，将显示该词的音标、读音、翻译等；选中中文或多个词，将显示翻译。
您的位置：首页 -> 词典 -> 拟聚碳酸酯水解
1)  'pseudo'-polycarbonate hydrolytic degradation
拟聚碳酸酯水解
2)  polycarbonate [英][pɔli'kɑ:bəneit]  [美][,pɑli'kɑrbə,net]
聚碳酸酯
1.
Research on Mechanical Properties of Microcellular Polycarbonate Foaming Material;
聚碳酸酯微孔泡沫塑料力学性能的研究
2.
Analysis of Polycarbonate Production Statement in World;
国内外聚碳酸酯的生产状况比较分析
更多例句>>
3)  polycarbonates
聚碳酸酯
1.
Biodegradable Polycarbonates with High Molecular Weight; Enzymatic Synthesis and Properties Improvement;
高分子量生物可降解聚碳酸酯的酶促合成及改性
2.
The application of the diphenolic acid in the production of epoxy resins,polycarbonates,water soluble resins,hyperbranched polyesters are mainly introduced.
本文介绍了其合成工艺进展及在环氧树脂、聚碳酸酯、水溶性树脂、超支化聚酯生产中的应用。
3.
In the last two decades, the biodegradable polycarbonates have attracted much attention in biomedical application due to their excellent properties such as mechanical properties and biocompatibility and so on.
作为生物医用材料的一个重要分支,生物可降解聚碳酸酯的研究已经引起了人们越来越多的关注。
更多例句>>
4)  PC
聚碳酸酯
1.
Development of Environment-friendly Flame Retardant PC;
环保型阻燃聚碳酸酯的研制
2.
Present Situation and Prospect for Market of PC and Its Alloy;
聚碳酸酯及其合金市场现状与展望
3.
Thermal Properties of PC/HBPS Blend;
聚碳酸酯与高支化聚苯乙烯共混物热性能的研究
更多例句>>
5)  polycarbonate(PC)
聚碳酸酯
1.
The fabrication of polycarbonate(PC) POF is introduced.
主要介绍了聚碳酸酯(PC)塑料光纤(POF)拉制的情况。
2.
Delamination and cause of polycarbonate(PC) thin-wall component were studied by comprehensive analysis methods and chemical stress cracking mechanism of PC delamination was found.
应用综合分析方法研究了聚碳酸酯(PC)薄壁件分层开裂及其起因,发现了分层的化学应力开裂机制。
更多例句>>
6)  polycarbonate (PC)
聚碳酸酯
1.
Bisphenol A polycarbonate (PC) is one of the most widely used engineering thermoplastics in the family of polycarbonate due to excellent properties, such as transparency, high mechanical strength, good thermal stability and flame retardancy.
本文在大量文献调研的基础上,对聚碳酸酯(PC)的阻燃技术以及PC常用阻燃剂的研究进展进行了综述。
2.
Flat ultra-filtration (UF) membranes were prepared by the dry/wet phase inversion method with polycarbonate (PC) as a membrane material, N-methyl-2-pyrrolidinone (NMP) as a solvent, and γ-GBL as a polymeric additive.
以聚碳酸酯(PC)为膜材料,N-甲基吡咯烷酮(NMP)为溶剂,γ-丁内酯(γ-GBL)为添加剂,水为凝胶浴,采用浸入沉淀相转化法制备平板膜。
3.
The reactive melt blending of polymethylmethacrylate (PMMA) and polycarbonate (PC) in the presence of various catalysts was studied.
研究了聚甲基丙烯酸甲酯（ＰＭＭＡ）／聚碳酸酯（ＰＣ）共混体系在各种催化剂作用下的反应性熔融共混。
更多例句>>
补充资料：聚对苯二甲酸丁二酯/聚碳酸酯共混物
分子式：
CAS号：

性质： PC与PBT都是聚酯类聚合物，机械共混时必须把原料充分干燥且避免温度过高以及在受热状态下停留时间过长，否则将因发生酯交换反应导致共混物性能劣化。另外的对策是加入各种稳定剂以阻止酯交换反应的发生。当PC含量很少时体系是部分相容的，PC占30％～40％时则完全相容，若PC含量比较多而又少于30％时，PBT/PC共混体系成为PBT；PC、PBT/PC相容物的共混体系。PBT中加入PC对冲击强度的提高尚不很突出，若同时加人橡胶类物质，则增韧效果更好。PC的加入使得PBT结晶度下降，对PBT因结晶引起制品易翘曲变形的特点得以改善，这种效果对于玻璃纤维增强PBT尤其重要。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条