1) 3Y-TZP ceramic
3Y-TZP陶瓷
1.
The tribological properties of 3Y-TZP ceramic/(Mg,Y)-PSZ ceramic pairs were investigated using a pin-on-disk friction and wear test apparatus under water lubrication.
结果表明,3Y-TZP陶瓷的磨损率随着载荷和滑行速度的增加而增大。
2) Y-TZP/Al 2O 3 ceramic
3Y-TZP/Al2O3陶瓷
3) Y-TZP ceramics
Y-TZP陶瓷
1.
The research status of removal mechanisms of grinding and wearing of Y-TZP ceramics in recent years was described,and some factors which play important roles in the process of wearing,such as mechanical performance,microstructure,phase transformation and friction medium were discussed.
叙述了近年来Y-TZP陶瓷磨削去除机理、耐磨性的研究进展以及一些因素(如力学性能、显微结构、相变、摩擦介质等)对Y-TZP陶瓷耐磨性的影响。
4) Ce-TZP ceramic
Ce-TZP陶瓷
1.
Study of pBMP/Ce-TZP Ceramic as A Composite Material for Artifical Bone;
pBMP/Ce-TZP陶瓷复合人工骨材料修复桡骨大段缺损的实验研究
5) Ce-TZP ceramics
Ce-TZP陶瓷
1.
The microstructure of Ce-TZP ceramics processed by a coating technique, compared to co-precipitated powder-based Ce-TZP, was analysed using a combination of XRD, SEM, TEM, etc.
采用XRD、SEM、TEM等分析手段对由液相包覆工艺制备的Ce-TZP陶瓷的微结构进行了研究,并和共沉淀粉体制备的Ce-TZP陶瓷进行了对比分析。
6) TZP ceramics
TZP陶瓷
1.
The wire drawing die of TZP ceramics was successfully developed with the 3Y_8Ce_TZP ceramic material (a little Al2O3 was added to increase the hardness and sintering performance of the matrix).
采用3Y_8Ce_TZP陶瓷材料(添加少量的Al2O3 以增加基体的硬度和烧结性能)成功地研制开发了TZP陶瓷拉丝模 ,并且开发了共沉淀法制取超细陶瓷粉末技术、成型技术及烧结技术。
2.
The erosion of TZP ceramics which has higher K1c value is mainly caused by plastic deformation and radial cracking, and the erosion of ZTA ceramics which has higher hardness and lower K1c value is generally caused .
SEM研究表明,具有高K_(10)的TZP陶瓷的冲蚀磨损主要由塑性变形和径向裂纹构成;ZTA陶瓷因硬度高与K_(10)值低,其冲蚀磨损主要表现为横向裂纹所引起的表面断裂。
补充资料：TZP
分子式：
CAS号：
性质：由细晶粒的四方相组成的致密氧化锆陶瓷，四方相的稳定剂为氧化钇、氧化铈等。具有高强度韧性，抗弯强度>2GPa，断裂韧性(KIC)>20MPa·m1/2。耐磨性好。硬度高、导热系数低[1300℃时为2.09W/(m·K)]。和铁及铁合金的匹配性良好。采用湿法制粉经单相温度区烧结制取。主要用作砂磨机和球磨机球、抽油泵油阀、医疗用刀具、汽车发动机针阀等。
CAS号：
性质：由细晶粒的四方相组成的致密氧化锆陶瓷，四方相的稳定剂为氧化钇、氧化铈等。具有高强度韧性，抗弯强度>2GPa，断裂韧性(KIC)>20MPa·m1/2。耐磨性好。硬度高、导热系数低[1300℃时为2.09W/(m·K)]。和铁及铁合金的匹配性良好。采用湿法制粉经单相温度区烧结制取。主要用作砂磨机和球磨机球、抽油泵油阀、医疗用刀具、汽车发动机针阀等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条