1) homogenization
[,həʊmədʒənaɪ'zeɪʃən]
均匀化热处理
1.
The application situation and the study development of the wrought aluminium alloy's homogenization;
变形铝合金均匀化热处理的应用现状与研究进展
2) homogenizing heat treatment line
均匀化热处理线
1.
The main characteristics of the continuous homogenizing heat treatment line for aluminum round billet made by Hertwich Engineering Co.
介绍了奥地利荷威奇工程公司(Hertwich Engneering)制造的连续式均匀化热处理线的主要特点,并与国内 广泛采用的批次式均匀化热处理线进行了对比,提出应用中存在的问题和解决方法。
3) uniform heat treatment
均匀化处理
1.
The microstructure and tensile properties of magnesium alloy ZK60 after uniform heat treatment and extrusion + aging treatment were investigated and were compared with those of the alloy as-cast.
结果表明,铸态ZK60合金经450℃×14h均匀化处理后,得到几乎单相固溶体,伸长率较铸态提高80。
2.
In this paper,the experiments of uniform heat treatment at different temperature and time were carried out on the ingots of Mg-Y-Nd-Zr alloy.
本文对 Mg-Y-Nd-Zr 合金铸锭在不同温度和时间下进行均匀化处理,采用金相显微镜、X-Ray 衍射和扫描电镜及能谱分析仪对合金不同状态下的微观组织和成分进行观察分析。
4) homogenizing
[英][həu'mɔdʒənaiz] [美][ho'mɑdʒə,naɪz]
均匀化处理
1.
Effects of 5083 aluminium alloy ingot homogenizing on properties and structures of ingot and plates;
5083铝合金铸锭均匀化处理对铸锭和板材组织与性能的影响
2.
The results show that comparing with as-cast, the alloy after homogenizing have a high percentage of area reduction,but its tensile strength decreased obviously;when the deformation temperature in 300℃420℃,The percentage of area reduction showed a trend of first increase and then decrease,and has a maximum value in 380℃-400℃,Tensile strength showed a degressive trend of similar lines.
均匀化处理的合金,在应变速率为0。
5) homogenization treatment
均匀化处理
1.
Effect of homogenization treatment on the hardness and electro-conductivity of as-cast Al-Zn-Mg-Sc alloy
均匀化处理对铝-锌-镁-钪铸态合金硬度和电导率的影响
2.
Effects of Homogenization Treatment on Microstructure and High Temperature Deformation Behavior of As-cast AZ80 Magnesium Alloy
铸态AZ80镁合金均匀化处理及高温塑性研究
3.
The homogenization treatment showed that the LFEC ingot has a better homogenization effect than conventional DC ingot.
利用低频电磁铸造工艺制备了具有细小、均匀等轴晶组织的7050铝合金铸锭,研究了均匀化处理过程中铸锭微观组织及性能的变化。
6) homogenizing treatment
均匀化处理
1.
Research on homogenizing treatment process for 3004 aluminum alloy ingot
3004铝合金铸锭均匀化处理工艺研究
2.
The constituent of the Φ 201 mm semicontinuous casting ingot of 7050 aluminum alloy and their evolution during homogenizing treatment at 470 ℃ were studied by means of differential scanning calorimeter(DSC), optical microscope(OM), scanning electron microscope with energy dispersive X-ray spectroscopy(SEM-EDS) and X-ray diffraction(XRD) analysis.
采用DSC、金相、扫描电镜及能谱分析、X射线衍射相分析等方法,研究了7050合金Φ200mm半连续铸锭的结晶相及其在470℃均匀化处理过程的变化规律。
3.
Three methods were used to fabricate C_f/Ti-Al composites for application of continuous fiber reinforced titanium aluminide matrix composites in the fields of aeronautics and astronautics: pressure infiltration, pressure infiltration-homogenizing treatment and mechanical alloying-pressure infiltration.
本文以连续纤维增强金属间化合物基复合材料在航空航天领域中的应用为背景,通过压力浸渗一步法、压力浸渗-高温扩散-均匀化处理三步法、机械合金化-压力浸渗二步法三种方法制备了C_f/Ti-Al复合材料,利用扫描电镜、透射电镜、拉伸试验、三点弯曲试验、均匀化处理等多种手段,较为系统地研究了复合材料的组织特征、力学性能及其影响因素。
补充资料：化热
化热
化热 病因病理学术语。指外感表邪传里而致热性病理变化。一般表邪初犯人体，恶寒发热并见，如表邪传入气分，则不恶寒、反恶热、烦渴、发热、尿赤、便臭、舌红苔黄、脉数等，此为病邪化热入里。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条