1) Statistic compactness
统计致密度
2) densification
[,densifi'keiʃən]
致密度
1.
Layer-directional dynamic compressive mechanical properties of two kinds of densifications 2D-C/SiC;
两种致密度2D-C/SiC层向动态压缩性能试验研究
2.
Effects of Modulus of Casting on Secondary Dendrite Arm Spacing and Densification of A357 Alloy;
铸件模数Mc对A357合金二次枝晶臂间距及致密度的影响
3.
The densification of powder and the bonding mechanism of face panel/core powder were investigated.
结果表明:轧制复合工艺可使芯层粉末获得理想的致密度,压下率为67%时,粉末的相对密度可达99。
3) density
[英]['densəti] [美]['dɛnsətɪ]
致密度
1.
Relationships of explosive press and powder density during explosive compaction;
爆炸压实中爆轰压力与粉末致密度的关系
2.
Effects of coal-sampling density on the elemental analysis by using laser-induced breakdown spectroscopy
煤样致密度对LIBS测量的影响
3.
Nanoscale ZnO and Al2O3 powder were used as raw material,the Al-doped ZnO target with high relative density(R.
以纳米量级的ZnO和Al2O3粉体为原料,通过湿式球磨得到了混合粉体,再经过模压成型与常压烧结工艺即可获得致密度超过95%的ZnO∶Al陶瓷靶材,其电阻率可达10-2Ω。
4) compactness
[英][kəm'pæktnis] [美][kəm'pæktnɪs]
致密度
1.
Discusses the effect of the process technology applied to both face plate and core powder on the powder compactness,and it in relation to foaming effect.
研究了轧制复合-粉末冶金发泡法制备泡沫铝夹心板的生产工艺,分析了板/芯结合工艺对芯层粉末致密度的影响,探讨了粉末致密度与发泡效果间的关系,初步得到了复合板的发泡机制。
2.
08 MPa·m -1/2 , and compactness u.
０８ＭＰａ·ｍ１２，致密度高达９８。
3.
The relative compactness of the coating was computed by using gravimetric method.
采用体视显微镜、表面洛氏硬度计研究了强化时间对锌镀层平整度、硬度的影响,采用重量法和铁试剂法分析了强化时间对锌镀层致密度和孔隙率的影响,采用XRD技术研究了强化时间对锌镀层物相组成的影响,采用中性盐雾试验研究了强化时间对锌镀层耐腐蚀性的影响。
5) relative density
致密度
1.
Effects of relative density on oxidation behaviors of MoSi_2 at high temperature;
致密度对MoSi_2材料高温氧化行为的影响
2.
Experimental investigation on relative density of powder compact prepared by magnetic pulse compaction and heating;
热复合磁脉冲粉末压坯致密度的试验研究
3.
The main factors influencing the relative density was studied in detail.
简述了试验过程,详细研究了影响产品致密度的主要因素。
6) cumulative density function
统计密度函数
补充资料：分布和特征量统计(见统计分析)
分布和特征量统计(见统计分析)
fenbu he tezhengliang tongjj分布和特征量统计见统计分析。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条