1) nano-ITO
纳米氧化铟锡
1.
It used polyvinyl butyral(PVB)as film-forming agent and nano-ITO as pigment to prepare nano transparent heat insulation coating.
以聚乙烯醇缩丁醛(PVB)树脂为成膜剂,以纳米氧化铟锡(ITO)为颜填料制备纳米隔热透明涂料,并对涂层进行了基本性能、光学性能及隔热效果的表征。
2.
The properties of abrasion resistance and thermal insulation of the waterborne polyurethane film were improved by the addition of nano-Al2O3 and nano-ITO respectively.
分别将纳米氧化铝和纳米氧化铟锡加入到水性聚氨酯树脂中,改善了水性聚氨酯涂膜的耐磨性能和隔热性能。
2) Sn-In2O3 nanopowders
锡掺杂氧化铟纳米粉
1.
In order to increase the dispersive effect of Sn-In2O3 nanopowders in organic MMA solution,the ways of mechanical and ultrasonic dispersion were used to modify the surface of Sn-In2O3 nanopowders when PEG4000,KH570,oleic acid and stearyl alcohol were choosed as dispersant.
找出了在MMA单体中分散最好的纳米粉体改性工艺条件:以乙二醇为分散介质、锡掺杂氧化铟纳米粉体摩尔分数为0。
4) nanometer tin dioxide
纳米氧化锡
1.
Aggregation is a main problem in liquid preparation of nanometer tin dioxide.
针对液相法制备纳米氧化锡颗粒团聚的问题,以溶胶-凝胶法为例,介绍了防团聚的几种措施:加入表面活性剂,有机溶剂洗涤,共沸蒸馏及冷冻干燥等。
5) nano tin oxide
纳米氧化锡
1.
The relationships between water absorption and electrical property of PE film and nano tin oxide with various proportions compared to conventional tin oxide in acrylic emulsion coating are introduced.
叙述了丙烯酸乳液涂层中不同含量的纳米氧化锡与普通氧化锡和聚乙烯塑料薄膜之间的吸水性和表面电性能关系,说明在丙烯酸乳液中加入同样含量的氧化锡时,纳米氧化锡和普通氧化锡在PE薄膜表面呈现出的表面电性能和吸水性能有不同的情况和变化规律,由此说明,同种材质的纳米材料与普通材料会有不同的基本物理性能。
2.
The nano tin oxide coating of MWNT was obtained from block tin and nitric acid.
利用混合酸和氨水对催化裂解法制备的碳纳米管进行纯化和表面改性,然后研究了纳米氧化锡包覆碳纳米管。
6) indium tin oxide
氧化铟锡
1.
Several preparation methods of nano indium tin oxide powders in recent years are introduced.
介绍了近年来纳米氧化铟锡(ITO)粉末几种常用的制备方法,着重讨论了共沉淀法,溶胶-凝胶法,水热法等工艺,并比较了几种制备方法的优缺点。
2.
5TiO3 thin films used as insulating layer in thin film electroluminescent devices were prepared on indium tin oxide-coated Corning 1737 glass by radio frequency magnetron sputtering, and the effect of volume ratio of O2 to Ar+O2 V(O2)/V(Ar+O2) on deposition rate, crystallinity as well as dielectric properties of the Ba0.
采用射频磁控溅射法在镀氧化铟锡的Corning1737玻璃基片上制备了用于无机电致发光显示器绝缘层的Ba0。
3.
Indium tin oxide (ITO) thin films have been prepared by a sol-gel process using inorganic metal salts as raw materials.
以无机盐为出发原料,采用溶胶 凝胶法制备了氧化铟锡(ITO)透明导电薄膜。
补充资料：银-氧化锡-氧化铟
分子式：
CAS号：
性质：银基含氧化锡(SnO2)和三氧化二铟(In2O3)的复合电接触材料，抗熔焊性和耐磨性能均良好。In2O3可改善电接触性能。如Ag-8SnO2-15In2O3的密度9.85～10.4g/cm3。布氏硬度785～1176.8MPa。电阻系数3.00～3.50×10-2Ω·mm2/m。用内氧化法制造。优良的中等负荷电接触材料，作断开电接点。
CAS号：
性质：银基含氧化锡(SnO2)和三氧化二铟(In2O3)的复合电接触材料，抗熔焊性和耐磨性能均良好。In2O3可改善电接触性能。如Ag-8SnO2-15In2O3的密度9.85～10.4g/cm3。布氏硬度785～1176.8MPa。电阻系数3.00～3.50×10-2Ω·mm2/m。用内氧化法制造。优良的中等负荷电接触材料，作断开电接点。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条