1) low pressure sheet molding compound
低压片状模塑料
1.
Research on Thickening Process of Low Pressure Sheet Molding Compound;
低压片状模塑料增稠工艺研究
2) low pressure sheet molding compounds(LPMC)
低压片状模塑料(LPMC)
3) Low Density SMC
低密度片状模塑料
4) sheet molding compounds
片状模塑料
1.
Study on flame-retardance of sheet molding compounds and its preparing;
新型阻燃片状模塑料的制备及其性能研究
2.
The polyurethone prepolymer was used as thickener to thicken hydrol-terminated unsaturated polyester, and a new sheet molding compounds (SMC) of unsaturated polyester was prepared.
采用聚氨酯预聚物作增稠剂对带端羟基的不饱和聚酯进行增稠,制备出一种新型的不饱和聚酯片状模塑料(SMC),并研究了其增稠性能、增韧性能及贮存稳定性。
3.
The effect of glassfiber cloth,short glass fiber and calcium carbonate on mechanical properties of unsaturated polyester sheet molding compounds was studied.
研究了玻纤布、短切玻纤及碳酸钙对不饱和聚酯片状模塑料力学性能的影响,实验发现:玻纤布增强不饱和聚酯片状模塑料的力学性能比短切玻纤好,随着玻纤含量的增加,不饱和聚酯片状模塑料的拉伸强度先增加,达到一极大值之后减少。
5) SMC
片状模塑料
1.
Sheet molding compound (SMC) is a thermosetting material made of unsaturated polyester resin, organic additives, the initiator, calcium carbonate, thickener and chopped glass fibres strands that are mixed and form sheets.
片状模塑料(Sheet Molding Compound，简称SMC)是一种加入不饱和聚酯树脂、有机添加剂、引发剂、碳酸钙、增稠剂和短切玻璃纤维等组分混合而成的热固性复合材料。
2.
The effects of dense packing fillers on the processing properties such as paste viscosity,mechanical properties and surface qualities of the sheet molding compound(SMC) products were investigated.
根据填料球-球双峰堆砌理论,通过激光粒度分析仪测定了几种不同比例填料复合后的粒径分布,使用连续级分法计算复合后填料的空隙率,得到了可实现密堆砌填料的类型和复合比例;通过测试树脂糊黏度、片状模塑料(SMC)试样的力学性能以及模压产品的表面波纹,研究了密堆砌填料对SMC生产的工艺性、力学性能以及模压产品表面质量的影响。
6) sheet molding compound
片状模塑料
1.
The possibility of Taihu Lake silt applied for the sheet molding compound filler was studied from the silt chemical and physical properties and its structure.
为了将太湖淤泥用作片状模塑料复合材料的填料,从淤泥物化性能和结构特征对太湖淤泥进行了表征和分析。
2.
The effect of different type of resins and low-profile additives and flame resistance reagents on the mechanical and flame resistance performance of Sheet Molding Compound(SMC) were studied by orthogonal tests method in this paper.
本文运用正交设计的实验方法,研究了不同树脂体系、低轮廓添加剂体系以及阻燃剂体系对SMC材料力学性能和阻燃性能的影响;通过测试拉伸强度和氧指数,确定了高阻燃片状模塑料的最佳配方组成,并对ATH实现高阻燃效果进行了分析。
补充资料：模状
1.犹规矩。 2.对事物情状或声音的描绘。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条