1) ZA alloy foam
泡沫锌铝合金
1.
Influence of rare earths on microstructure and damping capacity of ZA alloy foam;
稀土对泡沫锌铝合金组织和阻尼性能的影响
2.
In this paper, ZA alloy has been selected as the base material and ZA alloy foam has been prepared by vacuum infiltration casting process.
因此,本文采用自行设计的负压渗流设备装置,运用负压渗流铸造法成功地制备出了通孔泡沫锌铝合金,对影响泡沫锌铝合金渗流长度的因素进行了研究。
2) foamed aluminum alloy
泡沫铝合金
1.
In this article an element model of foamed aluminum alloy is created by finite element analysis software .
用有限元分析软件ANSYS建立泡沫铝合金的模型 ,模拟出在高温条件下泡沫模型的背火面温度场分布情况 ,得出其温度分布规律并求出它的耐火极限。
3) aluminum alloy foam
泡沫铝合金
1.
The effects of rare earths on the foaming process and corrosion resistance of aluminum and aluminum alloy foam have been investigated,and the relationship between the rare earths' content and the corrosion resistance of the aluminum and aluminum alloy foam has also been discussed.
研究了稀土对泡沫铝及泡沫铝合金泡沫化和压缩性能的影响,讨论了稀土加入量和泡沫铝及泡沫铝合金耐腐蚀性能的关系。
2.
The cell-size effect on compressive properties of aluminum alloy foam is analysed.
在分离式霍普金森压杆(SHPB)和MTS810材料试验机上对多组孔径、多组密度的开孔泡沫铝合金(AA6101)材料进行了准静态与动态压缩实验研究。
4) foam Al-alloys
泡沫铝合金
1.
Study on Technology of Making Foam Al-alloys;
泡沫铝合金制备工艺研究
2.
Property characteristic of foam Al-alloys of penetrating casting around granules was studied.
研究渗流铸造泡沫铝合金的性能特点,自行设计测试方法和制造测试装置,测试了泡沫铝合金的力学性能、流体透过性能、声学性能、热传导性能和阻尼性能。
5) foamed Al alloy
泡沫铝合金
1.
Performance of hollow cylindrical sandwich with high speicific strength foamed Al alloy core;
高比强泡沫铝合金中空层合圆管的性能
2.
The pouring temperature of liquid metal?preheating temperature of mould and porous body?the particle diameter ,which are interdependent and interfere each other to influence the damage degree of porous body,can influence the pore structare of foamed Al alloy.
金属液的浇注温度 ,模具与多孔体的预热温度 ,粒子粒径的大小等诸因素相互依赖相互影响 ,其结果直接影响着多孔体的损坏程度 ,从而在一定程度上影响着泡沫铝合金的孔结构。
6) Al alloy foam
泡沫铝合金
1.
Thermal decomposition properties of titanium hydride and Al alloy foam with low porosity and small pore diameter;
氢化钛热分解特性与小孔径低孔隙率泡沫铝合金
2.
Sandwich beams with high porosity and specific strength Al alloy foam core;
高比强高孔隙率泡沫铝合金三明治梁
3.
As a result, the interrelation between process parameters (presetting furnace temperature and sample temperature), foaming behavior of Al alloy foams and pore structure has been obtained.
因此,本文以PCM法为基础,通过实时摄像和断面图处理相结合方法,研究了试样温度、预设炉温(升温速度)、钢管尺寸对泡沫铝硅合金发泡特性的影响;获得了工艺参数(预设炉温、试样温度)和泡沫铝合金发泡行为及孔结构的关系,成功制取了泡沫铝硅、泡沫铝铜合金;利用自制模具,直接制备出了压缩性能试样,对不同材质、不同孔隙率、不同热处理状态的泡沫铝合金的静态压缩性能进行了测试分析;这些结果为下一步大尺寸泡沫铝的研究及应用奠定了基础。
补充资料：氟碳涂层铝合金装饰板制成的铝合金幕墙建筑物
氟碳涂层铝合金装饰板制成的铝合金幕墙建筑物
J氟碳涂层铝合金装饰板制成的铝合金幕墙建筑物
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条