1) flat membrane
平板膜
1.
Factors affecting critical flux in submerged flat membrane bioreactor;
影响一体式平板膜生物反应器临界通量的因素
2.
Furthermore,when the laminar flow boundary layer thickness on the surface of flat membrane came up to the thickness of precoated dynamic membrane(PDM),the steady aeration intensity was calculated by using the boundary layer theory in the Newtonian hydrodynamics.
L-1时的泥水混合液近似于牛顿流体,进而利用牛顿流体力学中边界层理论计算预涂动态膜(PDM)厚度等于平板膜表面层流边界层厚度时的稳定曝气量。
3.
The optimal run/off time of PVDF flat membrane with cut-MW 140000 and metal flat membrane with 300-mesh was analyzed through theoretical calculation and the calculated results were verified through test.
通过理论计算分析了PV D F截留分子量140000的平板膜和300目金属平板膜的最佳运行/停抽时间关系,并通过试验验证了理论计算结果。
2) flat sheet membrane
平板膜
1.
Optimized study on operational conditions of flat sheet membrane coupled sludge thickening;
平板膜污泥浓缩工艺操作条件的优化研究
2.
In the experiment, the effect of dosing diato maceous earth on the flux of flat sheet membrane was studied under the conditions of different sludge concentration.
实验研究了在不同污泥浓度情况下,投加硅藻土对平板膜分离性能的影响。
3.
In order to solve the problems of the conventional gravity sludge thickening,the process of flat sheet membrane for sludge thickening(MST) was used to thicken aerobic activated sludge.
为了解决传统污泥重力浓缩存在的问题,采用平板膜浓缩污泥(MST)工艺进行了中试。
3) plate membrane
平板膜
1.
The ultrafiltration kinetics of L-lysine is studied in the hollow-fiber membrane and the plate membrane respectively.
分别在中空纤维膜和平板膜中考察了 L-赖氨酸超滤动力学 ,结果表明 :中空纤维膜的过滤通量远大于平板膜 ,总过滤时间正相反 ;L-赖氨酸超滤动力学可拟合为浓差极化 -凝胶层模型 ,中空纤维膜较平板膜更符合此模
4) flat-sheet type membrane
平板膜
1.
The performance of the submerged flat-sheet type membrane bioreactor treating pollutant was investigated.
研究了一体式平板膜-生物反应器对水中污染物的去除效果。
2.
A submerged flat-sheet type membrane with pore size of 0.
08μm的浸没式平板膜对屋面雨水进行处理,取得了良好的效果,出水浊度<0。
5) PTFE flat membrane
PTFE平板膜
1.
PVDF hollow fiber membrane module and PTFE flat membrane module were compared in the vacuum membrane distillation processes for brine from SWRO desalination process.
15 K时,PTFE平板膜组件的膜蒸馏通量为24。
6) plate diaphragm
平板振膜
补充资料：平板式膜组件
分子式：
CAS号：
性质：也称平板式膜组件。由平板式膜和支撑板组成的膜分离单元设备。支撑板的两侧表面有窄缝，其内腔有供透过液流通的通道，支撑板的表面与膜相贴，对膜起支撑作用，有的组件还设有导流板，对料液起导流作用。板框组件分为系紧螺栓式、耐压容器式等几种。由许多相同的板框组件组装在一起构成板框式膜器。
CAS号：
性质：也称平板式膜组件。由平板式膜和支撑板组成的膜分离单元设备。支撑板的两侧表面有窄缝，其内腔有供透过液流通的通道，支撑板的表面与膜相贴，对膜起支撑作用，有的组件还设有导流板，对料液起导流作用。板框组件分为系紧螺栓式、耐压容器式等几种。由许多相同的板框组件组装在一起构成板框式膜器。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条