2) depth of moisture absorption of expansion ratio
吸湿厚度膨胀率
3) Thickness swelling rate
吸水厚度膨胀率
1.
The radial and tangential thickness swelling rates of compressed Chinese fir wood were determined and analyzed in different water temperature and interval.
测定和分析了杉木压缩木在不同水温、不同时段的径向和弦向吸水厚度膨胀率 结果表明,不同条件下,径向和弦向吸水厚度膨胀率随时间变化的速度和幅度不同,达到径向和弦向最大吸水厚度膨胀率的时间也不同 该研究结果为杉木压缩木的生产和利用提供了科学的理论依
4) TS
吸水厚度膨胀率
1.
THE EFFECTS OF ALL MAIN MANUFACTURING FACTORS ON THE THICKNESS SWELLING IN PARTICLEBOARD;
制造工艺因素对刨花板吸水厚度膨胀率的影响
2.
By tracking test on the different density particleboard made of Populus ussuriensis and Larix gmelini ,and the different thickness wood of Populus ussuriensis and Larix gmelini , this paper showed the thickness swelling equation of particleboard and wood are quite the same and coincide rather well with the theoretical deduction, that is TS(t)=a-b e -t/τ .
对不同密度杨木刨花板、落叶松刨花板及不同厚度杨木、落叶松在不同方向的吸水厚度膨胀率进行追踪测试 ,然后进行回归拟合 ,结果表明 ,刨花板和木材的吸水厚度膨胀率方程与理论推导结果能很好的吻合 ,方程的数学形式都为 :TS(t) =a -be-t τ。
3.
We analyzed the effects of hot pressing time,resin content,board density,and ratio of wood shavings to tobacco stems on the particleboard properties including modulus of rupture(MOR),internal bonding strength(IB)and thickness swelling rate of water absorption(TS).
初步探讨了实验室条件下烟秆/木材刨花板的生产工艺,研究了热压时间、施胶量、密度、木刨花加入量等因素对板材的静曲强度、内结合强度、吸水厚度膨胀率的影响。
5) Thickness swelling equation
厚度膨胀率方程
6) thickness swelling
吸水厚度膨胀率
1.
Influence of thickness swelling on the quality stability of laminate floor covering;
吸水厚度膨胀率对强化木地板质量稳定性的影响
2.
A test study was made on the influence of water temperature on the thickness swelling of medium density fireboard (MDF).
通过验证试验,探讨了水温变化对中密度纤维板吸水厚度膨胀率的影响程度,并对日常检测中如何保证水温符合检测要求提出了相应的建议。
3.
The study was conducted to make compressed bamboo by hot compressing microwave-softened bamboo of four different ages, during which the effect of compression rate, compress temperature and compress time on thickness swelling and recovery rate from compressive deformation was analyzed through orthogonal experiments.
运用正交分析法分析压缩率、热压温度、热压定型时间对密实化竹材的吸水厚度膨胀率和压缩变形恢复率的影响。
补充资料：均衡的通货膨胀率
均衡的通货膨胀率
【均衡的通货膨胀率】亦称“完全预期的通货膨胀率”。预期的通货膨胀率等于实际的通货膨胀率时的通货膨胀率。在这种情况下，通货膨胀率是稳定的，人们完全可以准确地预期未来的通货膨胀率。因此，这种通货膨胀只影响经济中的名义变量(例如，价格水平与名义利率)，而不影响经济中的实际变量(例如，实际国民收入与实际利率)。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条