1.
Medium density fiberboard-Determination of thickness swelling rate of water absorption
GB/T11718.6-1989中密度纤维板吸水厚度膨胀率的测定
2.
A Comparative Study of Testing Methods of Thickness Expansion Rate of Water Absorbing between Past and Present National Standards
新旧标准中吸水厚度膨胀率实验方法比对研究
3.
Discussion on the National Standard Testing Methods Used to Determine Thickness Swelling for Laminate Flooring Products
新版国标强化木地板吸水厚度膨胀率的检测解析
4.
As application of glue increased, all physical-mechanical properties increased, especially for TS.
施胶量增加，板材的各种物理力学性能都会提高，尤其对吸水厚度膨胀率影响最为显著。
5.
Experimental Study on Dry Density and Free Swelling Ratio of Cement-Treated Expansive Soil
水泥改性膨胀土干密度与自由膨胀率试验研究
6.
Floor add environmental protection damp proof factor in the sill, absorb water person who swell to be low.
地板基材中添加环保防潮因子，吸水膨胀率更低。
7.
The soil expands upon imbibing water.
土壤会由于吸水而膨胀。
8.
When the thermometer becomes warmer the mercuracy expands, the amount of expansion measuring the temperature.
温度计受热后，水银就膨胀。其膨胀量度量出温度。
9.
Influence Factor of expansion rate of cementitious material added by expansion admixture
掺膨胀剂水泥基胶凝材料膨胀率的影响因素
10.
The absorption strength in the absorption and expansion stage can be increased, the respiration strength in the germination stageis increased, and the conductivity is increased too.
在吸胀阶段,提高吸水强度,在萌发阶段,提高呼吸强度和电导率;
11.
Because the skin absorbed overmuch water (permeate pressure) expand. .
因为皮肤吸收了过多的水（渗透压）膨胀。。
12.
Studies on Volume Expansion Type Plasticized Polyvinyl Chloride;
吸水膨胀型软质聚氯乙烯材料的研究
13.
Study on Water-Swellable Rubber of CPE/HEC Blends
CPE/HEC共混型吸水膨胀橡胶的性能研究
14.
Research and Preparation of Curing Water-swelling Natural Rubber
硫化型吸水膨胀天然橡胶的制备研究
15.
Laboratory Evaluation of Water Swellable Rubber as an Blocking Agent
吸水膨胀橡胶作为封堵剂的室内评价
16.
Test methods for expanded perlite insulation--Density and water content
GB/T5486.3-1985膨胀珍珠岩绝热制品试验方法密度和含水率
17.
Effect of difference between thermal and setting expansion rate of the investments on the precision of castings
包埋材料热膨胀率和凝固膨胀率变化对铸件铸造精度影响的研究
18.
The rate of inflation must be held down.
通货膨胀率必须控制在低水平上.