1) ANSYS finite element
ANSYS有限元
1.
The model was established by using the ANSYS finite element analysis software,and the alternation regularity between anodic resistance and its numbers of days was researched.
利用ANSYS有限元软件建立了模型,分析了阳极电阻随着天数增加的变化规律。
2.
With ANSYS finite element optimized analysis function, the structure of the cross rod has been optimized, which proves the feasibility by means of ANSYS optimized analysis function to realize the structure optimization analysis.
通过利用ANSYS有限元优化分析功能对十杆桁架结构进行了优化分析 ,证明了用ANSYS优化分析功能实现结构优化分析的可行性 ,从而为其它复杂结构的优化分析提供了新的方法和依据。
3.
Considering and un-considering the soil-structure interaction under seismic excitations are contrasted and analyzed by using 2-D elastic-plastic method with ANSYS finite element analysis software.
本文利用ANSYS有限元软件,对水平地震作用下考虑和不考虑土和结构相互作用的高层建筑进行弹塑性对比分析。
2) ANSYS finite element method
ANSYS有限元
1.
The self-lubricating composite was designed by using the ANSYS finite element method at high loads.
利用ANSYS有限元软件对重载自润滑复合材料进行设计,通过摩擦磨损实验测定了其摩擦磨损曲线。
2.
The paper is analyzed and simulated with the use of the ANSYS finite element methods,adopt solid 92 element,set up finite element model of the board,get the picture of stress distribution,receive the great deformation value and proved with the experiments.
通过ANSYS有限元进行模拟分析,采用Solid 92单元,建立大立板的有限元模型,从直观了解到大立板应力分布情况,并得到大立板的变形值。
3) ANSYS finite element method
ANSYS有限元法
1.
This paper has derived the identification model of dynamic load based on the generalized ortho-polynomial characteristic parameters,and verified the load identification method for complicated structure through the ANSYS finite element method.
推导了基于广义正交多项式的随机载荷识别模型,并且通过ANSYS有限元法对复杂结构的载荷识别进行了验证,为复杂结构动分布载荷识别提供了一种新的理论和方法。
4) ANSYS finite element analysis
ANSYS有限元分析
1.
And the ANSYS finite element analysis is used to choose the number of hydraulic pressure vats,which are distributed in the pile gripper.
分析夹桩器受力及影响静摩擦系数因素,得出增大液压缸钳口表面粗糙度是增大钳口与钢桩间静摩擦系数的合理方法;并采用ANSYS有限元分析方法对夹桩器上均布液压缸数进行了选择。
2.
The contact problem of wire race ball bearing have been analyzed by ANSYS finite element analysis and Hertz s solution,through the compared contact stress results of ANSYS and the solutions deduced from formula of Hertz s solution,the research results show it is feasible by using ANSYS finite element analysis software to analyze contact problem of wire race ball bearing.
运用ANSYS有限元仿真软件以及古典Hertz接触理论,对实际工程中的钢丝滚道球轴承的接触问题进行研究,通过对ANSYS有限元分析得到的接触应力结果与Hertz接触理论推导公式计算的结果进行比较,验证了用ANSYS有限元软件分析钢丝滚道球轴承接触问题的可行性。
3.
Based on modal type analysis in ANSYS finite element analysis program, sub-space iteration method is employed to calculate the dynamic characteristics of this structure.
以郑州国际会展中心会议厅钢屋盖为研究对象,根据ANSYS有限元分析程序中的模态分析,利用子空间迭代法对结构进行了计算,分析了这种新型的预应力大跨空间钢屋盖的动力特性。
5) ANSYS/LS-DYNA FEM
ANSYS/LS-DYNA有限元
1.
The influence rule of material thickness on stress and strain of piece during cold roll forming was ob- tained with ANSYS/LS-DYNA FEM software to simulate 4～8mm thickness of materials.
使用ANSYS/LS-DYNA有限元软件的显式求解功能对厚度为4～8mm的板料进行有限元弹塑性分析,得到了板料成型过程中厚度因素对轧件应力、应变的影响规律。
6) ANSYS finite element software
ANSYS有限元软件
1.
Detailed analyses on the principles of operation,the magnetic field design requirements as well as the numerical simulation results obtained through ANSYS finite element software of the cylindrical thrust.
简要对比了环形和圆柱形两种推力器,对圆柱形推力器的工作原理、磁场设计的要求以及利用ANSYS有限元软件进行的电磁场数值模拟的结果进行了详细分析。
补充资料：SAMCEF——先进的通用有限元分析软件
SAMTECH公司是通用有限元软件包SAMCEF的开发商和服务商，是欧洲CAE领域的有力竞争者。SAMTECH在航空和航天工业，以及防卫、汽车、能源和造船等工业有广泛的应用。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条