1) Electrochemical machining(EMM)
微细电解
2) EMM
微细电解加工
1.
μs-grade Adjustable Pulsed Power Supply & EMM Application;
μs级可调脉冲电源及微细电解加工应用
2.
μs-Grade Adjustable Pulsed Power Supply & EMM Application;
薄片复杂细槽的微细电解加工
3.
According to the method of modular design of reconfigurable machine tool,a multifunctional system for micro electro-discharge machining(EDM) and electrochemical micromachining(EMM) was designed.
基于可重构机床模块化的设计方法,设计了一套可进行微细电火花加工和微细电解加工的多功能微细电加工系统。
3) micro-ECM
微细电解加工
1.
Research of Improving the Precision of Micro-ECM;
提高微细电解加工精度的研究
2.
The electrolytic products are hard to be removed from machining gap in micro-ECM(electrochemical machining) process,which may lower machining speed or stop the machining process.
微细电解加工时,由于间隙微小,生成的电解产物因难以从加工区域中移除而降低了加工速度甚至中断加工。
4) electrochemical micromachining
微细电解加工
1.
According to the requirements of electrochemical micromachining,an adjustable pulsed power supply unit is developed by using the μs-grade adjustable pulsed generating circuit,main circuit of pulsed power supply and protecting circuit which are controlled by single chip microcomputer.
根据微细电解加工的要求,应用单片机控制的微秒级可调脉冲发生电路、脉冲电源主电路和保护电路,研制了可调脉冲电源装置。
2.
Cr/Au sacrificial film was developed by electrochemical micromachining using a PET through-mask ablated with CO2 laser system.
以CO2激光直写加工PET膜模板,微细电解加工玻璃基片上的铬/金牺牲层快速获得窗口,湿法腐蚀及热键合制作玻璃微流控芯片。
5) micro ECM
微细电解加工
1.
The set is qualified the requirement of micro ECM.
设计和制作了新型微细电解加工的微秒级可调脉冲电源装置,介绍了此装置的总体结构、AT89C51单片机控制的脉冲发生电路、脉冲电源主电路和保护电路工作原理及过程。
2.
It will be great significance to thoroughly grasp micro ECM core techniques and develop micro ECM system to fabricate microstructures with the meso size(from .
研究和掌握微细电解加工的关键技术,研制开发微细电解加工系统,深入研究微细电解加工工艺,并结合制造业中大量存在的 meso scale(尺寸为几微米至几百微米)的微细结构,将微细电解加工用于实际工业应用研究,具有重要的现实意义。
6) electrochemical micromachining(EMM)
微细电解加工
1.
Aimed at the checking and controlling of the machining gap,the composition and distribution of the electrolyte,and the pulses power supply in electrochemical micromachining(EMM),the experimental investigation of EMM was carried out.
针对微细电解加工中脉冲电源技术,电解液成分配比,以及加工间隙检测、控制等问题开展了微细电解加工技术的试验研究工作。
2.
The paper presented a micro-system for electrochemical micromachining(EMM).
基于微细电解加工的特点,介绍了一种微细电解加工系统。
参考词条
补充资料：铝电解厂16kV·A电解槽系列及电解多功能机组
铝电解厂16kV·A电解槽系列及电解多功能机组
铝电解厂16kV·A电解槽系列及电解多功能机组
说明：补充资料仅用于学习参考，请勿用于其它任何用途。