1) effective thermal conductivity
等效热传导系数
1.
Based on the finite element discretization of the microstructure,the sensitivity analysis for the effective thermal conductivity is carried out and the topology optimization model of the heat-conducting microstructure is built to maximize the different com.
提出基于散热弱度的材料微结构热传导性能的预测方法,分别从理论和数值上验证该方法与均匀化方法的等效性;推导出微结构等效热传导系数的灵敏度计算格式,建立传热微结构拓扑优化的数学模型。
2) equivalent
等效
1.
The equivalent circuit with no coupling of T coupled inductors;
T型耦合电感的去耦等效
2.
Analysis of the equivalent capacitive property about dcmotor;
直流电动机等效电容特性分析
3.
Equivalent damage value transform according to extrema of shear stress time history and its application in earth and rockfill dam s response to multi-point earthquake input;
基于剪应力时程极值的损伤值等效转换及其在土石坝多点输入地震反应中的应用
3) equivalence
等效
1.
A fast equivalence algorithm of RCS based on FDTD method;
计算二维雷达散射截面的一种快速等效算法——时域有限差分法
2.
This paper deals with equivalence experimentation on Shock Test.
本文阐述了冲击试验时的等效试验方法。
3.
This article gives the ways of thinking and path of solving the non-linear electric resistance net by means of equivalence and what should be paid attention to for reference only.
由于求解非线性电阻网络的方法比较繁琐,对初学非线性电阻网络者而言,常常感到比较困难,本文给出,利用等效的方法求解非线性电阻网络的思路和途径,以及注意事项,意在为同仁提供参考。
4) equivalent effect
等效
1.
The Influence of Cultural Differences on "Equivalent Effect" and the Translation Strategies Concerned;
从文化内涵词语看文化差异对“等效”翻译的影响及对策
2.
Secondly Nida s Functional Equivalence theory argues for a complete equivalent effect of the original receptor of the source text and the receptor of the translated version.
奈达的功能对等理论要求原作与译文对读者感受的等效。
3.
Thus it is not easy to achieve the equivalent effect in translation.
习语富有鲜明的民族文化特性,英汉习语互译要达到等效翻译的效果并非易事。
5) equivalent circuit
等效电路
1.
Analysis on equivalent circuit of Ce_(0.8)Gd_(0.2)O_(1.9) film;
EIS测定Ce_(0.8)Gd_(0.2)O_(1.9)电导率的等效电路分析
2.
Study on ultrasonic torsional vibration and equivalent circuit of thin annular resonator;
环形振子的扭转振动等效电路及有限元模态分析
3.
Application of genetic algorithms in estimating the initial value of equivalent circuit;
遗传算法在等效电路模型初值估计中的应用
6) equivalent strain
等效应变
1.
Expression on equivalent stress and equivalent strain of wall rock state of tunnel;
巷道围岩状态的等效应力等效应变表述
2.
Analysis on flow velocity and equivalent strain of the metal in the process of liquid extrusion;
液态挤压过程中金属流动速度与等效应变的分析
3.
The simulation results show that the outer corner angle mainly effects the homogeneity of the equivalent strain, but less effects the values of the equivalent strain.
结果表明:模具外角主要影响等效应变分布的均匀性,对等效应变值的大小影响不大;模具内角主要影响等效应变值的大小,对等效应变分布的均匀性影响较模具外角小;随着模具外角的逐渐增大,模具拐角变形区域逐渐变大,变形机理由纯剪切变形变为剪切变形和弯曲变形相结合的复合变形;随着模具内角的逐渐增大,模具拐角变形区域基本保持不变,变形机理由纯剪切变形变为弯曲变形;模具内角较模具外角对加载载荷的影响更为显著。
参考词条
补充资料:固体热传导
固体热传导
heat conduction of solid
固体热传导heat eonduetion of solid物质内部存在温度梯度时,热量从高温端向低温端的传导。是一种能量输运过程。表征物质导热能力的物理参数是热导率只。按照傅里叶定律,热导率是联系物质单位时间内、单位面积上通过的热量创热流密度)与温度梯度(gradT)之间正比关系的比例系数,即 q-一只gradT式中的负号是因为热流密度矢量与温度梯度矢量总是反向,为使矢量式平衡而加的。热导率的国际单位是W·m一1·K一1。热传导是通过导热载体实现的。固体的导热载体有电子、声子(晶格振动波)、光子等。热导率可表达为各种导热机制对热导率贡献的叠加“一琴合e‘。‘“式中ci、认和11分别为导热载体亥的比热、运动速度和平均自由程。每种导热机制又是其他导热机制的阻碍因素,因此固体的热传导是一个复杂的物理过程,理论上准确预侧热导率的数值及其随温度的变化比较困难。 纯金属以电子导热为主,声子导热比例很小。金属电子论表明,热导率和电导率之比与绝对温度成正比,比例系数为洛伦兹数:三拱一或立)2一2.45又1。一。(w.。.K一2) a1o一么式中叮为电导率,k为玻耳兹曼常数,e为电子电荷。这就是维德曼一夫兰兹一洛伦兹定律。室温附近对多种金属进行的实验结果与其吻合得很好。某些固体材料的热导率┌───┬──┬─────────┬────┬──┬─────┐│材料 │衅 │ 热导率 │材料 │衅 │ 热导率 ││ │(一)│(W·m一,·oC一‘)│ │(毛)│(W·m一1 ││ │ │ │ │ │ ℃一’) │├───┼──┼─────────┼────┼──┼─────┤│铝 │0 │202.4 │石棉 │ 0 │0 .151 ││铜 │0 │387 .6 │耐火砖 │204 │1 .004 ││金 │20 │292 .4 │粉状软木│37 │0 .042 ││纯铁 │0 │ 62 .3 │耐热玻璃│ 0 │1 .177 ││铸铁 │20 │ 51 .9 │冰 │29 │2 .215 ││银 │0 │418.7 │松木 │ │0 .159 ││低碳钢│0 │ 45.0 │干石英砂│ │0 .260 ││钨 │0 │159.2 │软橡胶 │ │0 .173 │└───┴──┴─────────┴────┴──┴─────┘ 绝缘体内几乎只有声子导热一种导热机制。声子导热比电子导热一般小两个数量级。合金和半导体内同时存在电子导热和声子导热两种导热机制。一般认为,金属、合金、半导体中的声子导热与绝缘体中的声子导热相仿,而它们的电导率是依次减小的,由维德曼一夫兰兹一洛伦兹定律知,金属、合金、半导体的热导率依次减小。 不同固体材料的热导率差别很大,其值主要是通过实验得到(见表)。 (何冠虎)
说明:补充资料仅用于学习参考,请勿用于其它任何用途。