1) water receiver
接水盒
1.
The molding process of refrigerator water receiver, structure and work process of injection mold are introduced in detail.
详细介绍了冰箱接水盒注塑件的成型工艺及注射模的结构及工作过程。
2.
Over the forming process analysis to plastic parts of water receiver, a feasible mold design project is provided, and a kind of demoulding mechanism of dual-slanting sliders is designed, which solves the technical problems of demoulding difficulty in lifting ear of plastic parts.
通过对接水盒塑件进行成型工艺分析,提出了合理的模具设计方案,设计了一种双斜滑块脱模机构,解决了塑件挂耳部分脱模困难的技术难题。
2) water tight junction box
水密接线盒
3) junction box
接线盒
1.
According to the function and structure and dimension of junction box, the material capability and injecting technology were analyzed, the structure of injection mold was designed.
根据接线盒盒体的功能、结构与尺寸,进行了材料性能、注射工艺等分析,设计了注射模。
2.
The rain leak defect of the junction box on the hoist seat of the main transformer bushing has a negative effect on the transformer operation.
介绍了主变套管升高座接线盒防雨性能的缺陷和对主变运行可靠性的影响及提高其防雨能力的方
3.
The computer program was used to optimize the casting process for the stator temperature measurement junction box.
以定子测温接线盒为例,介绍了利用计算机程序进行铸造工艺方法的优化设计。
4) terminal box
接线盒
1.
In order to solve the distortion of terminal box after hydraulic test, it has improved the technology,hydraulic testing device and the fittings for this test.
为了解决高压隔爆接线盒的水压试验变形问题,对水压工艺及水压机、水压工具作了改进。
2.
It is presented that the design features of terminal box for Series YBK2 flameproof three-phase induction motor,comparing with Series YBK and a design proposal is given in this article.
文章对YBK系列电动机和YBK2系列电动机接线盒的规格进行了比较,介绍了YBK2系列电动机接线盒的设计特点,最后给出设计方案。
3.
In this article,it put forward about the design highlights and points to be attention of the sealing structure for cable entry used in explosion-proof motor,by comparative analysis of sealing structures of terminal boxes both here and abroad.
通过对国内外防爆电机接线盒电缆密封结构的对比分析,提出了防爆电机接线盒电缆密封结构的设计要点以及应注意的问题。
5) connection box
连接盒
1.
In terms of large size multi-core pre-fabricated branched cables,this paper explores the key manufacturing processes for the main cable and branch,conductor crimping and insulation of the connection box.
对大截面多芯预制分支电缆的主干线和分支线、导体压接、连接盒绝缘体等制造工艺要点进行了探讨。
6) cable box
分接线盒
补充资料：星接阻抗和三角接阻抗的变换
星接阻抗和三角接阻抗的变换
transformation between starc-onnected and delta-connected impedances
x ing]一e乙日kongl介e sonJ一00}Iez日伙ongde匕一。一〕huon星接阻抗和三角接阻抗的变换(t ransfor-mation betweenstar一eonneeted and delta-eonneeted imPedanees)接成星形的三个阻抗和接成三角形的三个阻抗互相替代的等效变换。它们之间的关系可用一组变换公式表示。按这组公式，用星接阻抗替换三角接阻抗或者反过来，不会影响稳态下电路其他部分的正弦电压和电流，常用于对称三相电路的分析和计算。 图1为三个阻抗21、Z:、23接成星形(又称丫形)。图2为三个阻抗Z小22。、Zal接成三角形(又称△形)。它们之间的变换公式如下:人23土图1星接阻抗图2三角接阻抗(1)将星形连接变换成三角形连接212一Z:+22+2 122及3一22+za十警(1)、|冬|矛231一23+21+2321(2)将三角形连接变换成星形连接z、-二一典乒兴-) 艺‘2士乙“3十乙31…_2 oqZI，}Z。一下万~一二-二二-汁 乙‘2士乙23十乙3‘1_Z。IZoq}艺q一二二一~二，二二--，-二二-~J 乙12十乙23十艺32夕(2) 当三个星接阻抗相等，即21一Z:一23一z丫、三个三角接阻抗相等即212一223一231一Z△时，变换公式是 Z二一32丫，Z丫一Z△/3
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条