1) Carrousel coiler
Carrousel卷取机
1.
Main engine structure of Carrousel coiler and analyses on kinematics and dynamics parameters;
Carrousel卷取机主机结构及运动、动力参数分析
2) reel
[英][ri:l] [美][ril]
卷取机;卷筒
3) tension reel
卷取机
1.
The article describes the winding conditions under conventional assumptions, non-assumptions and simplifications for tension reels in cold rolling mills, and also gives the winding tension and nip pressure under such conditions.
简明介绍了冷轧卷取机在传统假定条件下的可卷弯条件和非假定及非简化条件下的可卷弯条件,同时给出了在此条件下的可卷弯张力和可卷弯咬带力。
2.
The domestic design of the expanding cylinder of tension reel mostly is done consulting to similar foreign design and the results,generally,are far from the actual work conditions.
国内卷取机卷筒涨缩液压缸设计的主要方法是参照国外同类设计,其计算公式计算结果与实际工程相差甚远。
3.
In the course of produce of number one coupled tandem mill,blocks of entry side and exit side of the carrousel double mandrel sleeve tension reel in the exit side of the product line were frequently struck down by dial orientation block.
对唐钢冷轧薄板厂一酸轧生产线出口的卡罗塞尔双芯轴卷取机在生产过程中,入口侧和出口侧的挡块频繁被转盘定位块撞掉的问题进行全方位的分析,并且运用多种方法对入、出口挡块进行了技术改造。
4) coiler
['kɔilə]
卷取机
1.
TDC-based wrapping roll automatic jump control system for a 1500mm hot strip mill coiler;
基于TDC的1500热连轧卷取机助卷辊自动踏步控制系统
2.
Development of data acquisition system for coiler;
卷取机PDA数据采集系统的开发
3.
An Advanced Practical Automatic Control System for Hydraulic Coilers;
先进实用的自动化控制系统在全液压卷取机上的应用
5) recoiler
[ri'kɔilə]
卷取机
1.
The calculation method of recoiler power in the strips' production is introduced.
介绍了带材生产线中卷取机功率的计算方法。
2.
The three motors tandem drive scheme is adopted while designing the recoiler drive system of 2050 mm six-high non- reversing aluminum strip cold rolling mill developed by our institute.
我院设计的2050mm 六辊不可逆铝带冷轧机的卷取机采用三台直流电机串联的传动方案。
3.
Main equipment design of strip slitting unit applied for big steel coil,heavy thickness and high strength,such as uncoiling machine,disc shear and recoiler were researched.
对大卷、厚壁、高强度钢带纵剪机组的主要设备如开卷机、圆盘剪、卷取机的设计进行了探讨。
6) OptiReel
OptiReel卷取机
1.
OptiReel:Production Application and Operation Experience;
OptiReel卷取机的应用及运行经验
补充资料：造纸机表面卷取机
分子式：
CAS号：
性质：又称辊式卷纸机或圆筒式卷纸机。由卷纸辊、卷纸缸、机架及换辊装置等部件组成。安装在造纸机末端为把生产的纸幅卷成纸卷，以便贮存和进一步加工。表面卷取机是使用广泛的卷纸设备，它是靠卷纸辊与卷纸缸间的摩擦转动并将纸幅卷在辊筒上，其型式有两辊式和单辊式之分。新式纸机多采用单辊式，并装有气动加压及重量传感器等控制装置。
CAS号：
性质：又称辊式卷纸机或圆筒式卷纸机。由卷纸辊、卷纸缸、机架及换辊装置等部件组成。安装在造纸机末端为把生产的纸幅卷成纸卷，以便贮存和进一步加工。表面卷取机是使用广泛的卷纸设备，它是靠卷纸辊与卷纸缸间的摩擦转动并将纸幅卷在辊筒上，其型式有两辊式和单辊式之分。新式纸机多采用单辊式，并装有气动加压及重量传感器等控制装置。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条