说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 横向断裂强度
1)  transverse rupture strength
横向断裂强度
1.
0HRA,transverse rupture strength(TRS) of 1819MPa.
6%,横向断裂强度由1045MPa提高到1819MPa。
2)  Cross breaking strength
横向断裂强力
1.
Cross breaking strength of spunlaced nonwovens is an important machinery property index of spunlaced product.
水刺非织造布的横向断裂强力是水刺产品的一项重要的机械性能指标。
3)  horizontal tear strength
横向撕裂强度
1.
R and high frost - line in order to make the films have proper longitudinal tear strength ( MD) and horizontal tear strength (TD).
试验发现:为保证合适的薄膜纵向撕裂强度和横向撕裂强度,应在高牵引速度、大吹胀比和高起霜线的条件下进行该树脂的加工。
4)  transverse rupture
横向断裂
1.
The structure of transverse ruptured 72A hard steel wire has been observed by microscope and its hardness has been measured.
用金相显微镜和显微硬度计分别观察和测量了拉拔过程中发生横向断裂的 72 A硬线钢组织与硬度。
2.
Fe powder S values of transverse rupture were assayed by technology test.
通过工艺试验测定了Fe粉的横向断裂力值,并应用表示法对所得试验结果进行了对比分析。
3.
The inspection and analysis and the process thermal simulation test have been made by using metallographic microscope and SEM on the failure of transverse rupture in the containing silicon low carbon steel billets after continuous casting.
对含Si低碳钢连铸坯发生的横向断裂缺陷进行了金相、扫描电镜检验分析及加热工艺模拟试验;对铸坯从钢水凝固到轧前加热断裂的热历程中所受外力及其与裂纹形成的关系进行了分析。
5)  transverse strength
横向强度
1.
FEA of the transverse strength of bulk carriers;
散货船横向强度有限元分析
2.
Impact of transverse strength on big hatch cargo ship;
横向强度对大舱口货船的影响
3.
Contrast analysis of singlehull and doublehull bulk carriers' transverse strength by FEM
单双壳散货船横向强度的有限元对比分析
6)  lateral strength
横向强度
1.
According to the finite element analysis and drawing examination of three VLCC tankers, the paper mainly describes the key points in the design of longitudinal strength, lateral strength, longitudinal bulkhead, lateral bulkhead and double bottom of the VLCC tanker.
根据三艘超大型油船 VL CC的有限元分析和图纸审核 ,本文着重阐述了超大型油船总纵强度、横向强度、纵舱壁、横舱壁、双层底结构设计的要
补充资料:断裂强度(breakingstress)
【断裂强度】(breakingstress)将长方形高聚物样品夹于拉力机上以均匀速度拉伸至样品断裂时所须的应力。其值和断裂前的形变受到多种因素的影响。如在高聚物玻璃化温度以下很多度,形变很小时,应力即迅速上升,引起脆性断裂;温度稍为升高时,分子链段在大应力作用下,微有移动,断裂时主要仍是脆性的,但略带韧性;当温度接近玻璃化温度,链段在应力不太大时,能移动,产生强迫高弹形变。此时无定形高聚物链段有取向,有时可能部分结晶,在样品中部出现细颈,断裂
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条