1)  SiC preform
SiC预制件
1.
During the preparation of SiCp/Al composite produced by pressureless infiltration technique,the effect of sintering process on open porosity and strength of SiC preform was investigated,and the effect of infiltration process on the Al melt infiltrating into SiCp/Al composite was studied as well,the thermo-physical and coating characteristics of composites were also evaluated.
研究了无压渗透法制备电子封装SiCp/Al复合材料过程中,烧结工艺对SiC预制件开孔率、抗压强度的影响,以及渗透工艺对Al液渗透形成复合材料的影响,并对所制备的复合材料热物理性能和表面涂覆进行了评价。
2)  Si
Si
1.
DCXRD Investigation of a Ge/Si(001) Island Multilayer Structure;
DCXRD分析Ge/Si(001)多层纳米岛材料(英文)
2.
ICP-AES Determination of Mn,Si,Al,Ti,Nb,La in Ultrahigh Strength Steel;
ICP-AES法测定超高强度钢中Mn,Si,Al,Ti,Nb,La杂质元素
3.
Effects of Trace Si,Ba and Sn on the As-cast Microstructure of AZ91 Magnesium Alloy;
微量Si、Ba、Sn对AZ91铸态组织的影响
3)  Silicon
Si
1.
Mechanism of effect of nutrient silicon and water temperature on phytoplankton;
营养盐Si和水温影响浮游植物的机制
2.
Silicon, aluminium and other, a total of 10 elements in different kinds of biological samples, were measured by ICP-AES.
探讨不同种类生物样品中Si和Al等10种元素的测定方法,采用干灰化结合偏硼酸锂碱熔灰分的前处理方法,用电感耦合等离子体原子发射光谱法(ICP-AES)同时测定试样中Si和Al以及Ca,Mg,Fe,Na,P,Mn,Sr,Ti。
3.
This suggests that sodium attack of both aluminium and Al-12%Si alloy is the result of a reaction between sodium and the silicon contained in the aluminium.
本文研究了纯Al及Al－12％Si合金在液态Na中的腐蚀特性。
4)  Si)
Si）
5)  a-Si
a-Si
1.
Inner circuit and noise equivalent temperature difference (NETD) of the a-Si FPA were analyzed and the equation of NETD was deduced at length.
本文根据对a-Si微测辐射热计焦平面内部的微观电路结构和噪声等效温差(noise equivalent temperature difference,NETD)的分析,经过详细地推导NETD公式,认为可调节两个偏置电压,使焦平面可以在较低的温度下稳定工作。
2.
In this dissertation，preparation and thermoelectric characterization of conventional silicon-based materials and devices have been studied, including amorphous silicon (a-Si) films, polycrystalline silicon germanium (polySiGe) films and amorphous silicon thin-film-transistors (a-Si TFT).
本文深入系统地研究了a-Si薄膜、polySiGe薄膜和a-Si TFT等三种常规硅基材料和器件的制备方法和热电特性，开发了一套新型的基于多孔硅牺牲层技术的MEMS-IC集成工艺，利用该工艺成功地制作了a-Si和polySiGe薄膜电阻式测辐射热计，在国际上首次提出并实现了基于a-Si TFT的室温红外探测器单元与8×8阵列原型，器件初步具备了室温红外热成像的能力。
6)  Si/Si
Si/Si
参考词条
补充资料：bioactive glass-ceramic composite reinforced by SiC whisker
分子式：
CAS号：

性质：由碳化硅晶须与生物活性玻璃陶瓷复合而成的生物陶瓷复合材料。高强度、高弹性模量、无毒的碳化硅晶须在陶瓷基材中弥散分布，使材料中的裂纹相对均匀，裂纹扩展发生转向和分支；外力作用下碳化硅晶须拔出时产生的拔出效应，使复合陶瓷的弯曲强度达460MPa，断裂韧性达4.3MPa·m1/2，维伯尔系数高达24.7，标志着它是可承力的生物陶瓷复合材料。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。