1) laser ceramics powder
激光陶瓷粉体
1.
Nd:GGG laser ceramics powder were synthesized by sol-gel combustion method,and sol-gel transformation was discussed in this paper.
采用溶胶-凝胶燃烧法成功合成了Nd:GGG激光陶瓷粉体,讨论了溶胶-凝胶的转化,并对Nd:GGG粉体进行了XRD、TG-DTA、SEM及荧光光谱分析。
2) laser ceramics
激光陶瓷
1.
Some important transparent ceramics such as infrared ceramics,laser ceramics and scintillator ceramic were introduced and the developing trends were overviewed briefly.
分别介绍了红外陶瓷、激光陶瓷、闪烁陶瓷,并对他们未来的发展趋势进行简要的综述。
2.
So the new application of transparent polycrystalline ceramics would be exploited as laser ceramics.
随着透明陶瓷制备技术的不断发展,使得部分透明陶瓷成功用作激光放大介质,这为透明陶瓷的应用开辟了新的领域,即用作激光陶瓷。
3.
The defects create optical scattering and absorption centers in laser ceramics, and also exert an influence on the thermal and mechanical properties of the materials.
激光陶瓷中的各类缺陷,包括晶界、微气孔、杂质、非主晶相、表面缺陷和色心等,构成了激光陶瓷中主要的光散射和吸收中心,并对材料的热学和力学性质产生影响。
3) Ceramic powder
陶瓷粉体
1.
The effect of hydrothermal method on properties of ceramic powders;
水热法工艺对合成陶瓷粉体性能的影响
2.
Synthesis of Ba_(0.7)Sr_(0.3)TiO_3 ceramic powder by complex precursor route;
络合溶胶-凝胶法制备Ba_(0.7)Sr_(0.3)TiO_3陶瓷粉体
3.
Synthesis of (1-x)Ca_(0.4)Sm_(0.4)TiO_(3-x)Li_(0.5)Nd_(0.5)TiO_3 ceramic powder by EDTA precursor;
EDTA络合法合成CSLNT陶瓷粉体
4) ceramic powders
陶瓷粉体
1.
Study on the preparation of ceramic powders of ternary pyrochlor containing bismuth by coprecipitation;
共沉淀法制备三元系铋基焦绿石型陶瓷粉体
2.
The development trends of ZnO varistor ceramic powders;
氧化锌压敏陶瓷粉体的研究进展
3.
Oxidation behavior of polymer derived SiCO ceramic powders
先驱体转化法制备SiCO陶瓷粉体的氧化性能
5) ceramic laser
陶瓷激光器
1.
The development of mode-locked ceramic laser with semiconductor absorber;
用半导体吸收体实现陶瓷激光器被动锁模研究进展
2.
Based on Siegman rate equations,the output properties of Cr4+∶Nd3+∶YAG self-Q-switched ceramic laser are numerically analyzed with the method of self-doped RungeKutta.
利用Siegman速率方程组,采用自适应变步长龙格-库塔数值方法,对Cr4+∶Nd3+∶YAG自调Q陶瓷激光器的输出特性进行了数值模拟,详细讨论了Nd3+∶YAG陶瓷厚度以及Cr4+离子浓度对陶瓷激光器的重复频率、峰值功率、单脉冲能量、脉冲宽度、以及平均输出功率等输出特性的影响。
3.
With uniformly side-around arranged compact pumping structure, high conversion efficiency operating of diode-laser-array side-pumped Nd∶YAG ceramic laser was demonstrated.
采用侧面环绕均匀排布的紧凑型抽运结构,实现了激光二极管阵列侧向抽运Nd∶YAG陶瓷激光器高效率激光输出。
6) ceramic laser tube
陶瓷激光管
补充资料：激光陶瓷
分子式：
CAS号：
性质：用作固体激光器的陶瓷材料。激光器材料大都采用玻璃和单晶体，但掺钕、钍和铌的透明氧化钇陶瓷比掺钕的玻璃材料的导热性好，比单晶激光材料容易制造，且尺寸不受限制，激光陶瓷的气孔率很低，透明度很高，但存在散热损耗和激光阈值较高等问题有待改进。用于制造激光器部件。
CAS号：
性质：用作固体激光器的陶瓷材料。激光器材料大都采用玻璃和单晶体，但掺钕、钍和铌的透明氧化钇陶瓷比掺钕的玻璃材料的导热性好，比单晶激光材料容易制造，且尺寸不受限制，激光陶瓷的气孔率很低，透明度很高，但存在散热损耗和激光阈值较高等问题有待改进。用于制造激光器部件。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条