1) super austenitic stainless steel
超级奥氏体不锈钢
1.
The concept of super austenitic stainless steel appeared with super ferrite stainless steel and super double phases stainless steel together.
超级奥氏体不锈钢的概念是与超级铁素体不锈钢及超级双相不锈钢一起出现的。
2.
The liquids of N08904 super austenitic stainless steel was computed and tested by means of theoretical calculation and thermal analysis,reasonable overheat was put forward and leaking problem of molten steel during continuous casting was solved and continuous casting production had come into effect.
采用理论计算与热分析相结合的方式对N08904超级奥氏体不锈钢的液相线温度进行了计算测试,提出了合理的过热度参数,解决了连铸易漏钢问题,实现了连铸生产。
3.
The results showed that Cr20Ni18Mo6MnVSi super austenitic stainless steel in the chloride solution had excellent corrosion resistance properties after solution treatment at 1100℃ for 2h and followed by the aging treatment at 520℃ for 4h.
1型超级奥氏体不锈钢经1100℃固溶2h+520℃时效4h处理后,在高浓度氯离子溶液中的耐腐蚀性能优异。
2) Ultra-low carbon austenitic stainless steel
超低碳奥氏体不锈钢
1.
An investigation was made on the effect of rewelding on mechanical properties of Ultra-low carbon austenitic stainless steel based on mechanical properties test and microstructure examination.
通过对反复焊接1～5次的超低碳奥氏体不锈钢力学性能的试验及金相组织的分析,研究了反复焊接对超低碳奥氏体不锈钢力学性能的影响。
3) super-martensitic stainless steel
超级马氏体不锈钢
1.
Property requirements of super-martensitic stainless steel especially using for hydroelectric station are briefly introduced in this paper,characteristics and basic principle of alloying process of this steel,especially,the influence of alloy process on the content and distribution of retained austenite and δ ferrite in the steel are also analyzed in detail.
阐述了水电行业用超级马氏体不锈钢的性能要求以及此类材料成分设计、合金化特点和基本原则。
4) austenitic stainless steel
奥氏体不锈钢
1.
Research on intergranular atuack of Fe-17Mn-13Cr-0.3N austenitic stainless steel;
Fe-17Mn-13Cr-0.3N奥氏体不锈钢的晶间腐蚀研究
2.
Effect of Magnetic Field of the Pulse on the Quenched Structure of Austenitic Stainless Steel;
脉冲磁场对奥氏体不锈钢液淬组织的影响
3.
Chemical cleaning of austenitic stainless steel and passivation;
奥氏体不锈钢设备的化学清洗和钝化
5) SUS301 austenite stainless steel
SUS301奥氏体不锈钢
6) austenitic stainless steel SUS316
奥氏体不锈钢SUS316
补充资料：奥氏体不锈钢
分子式：
CAS号：
性质：在常温下具有奥氏体组织的不锈钢。含铬18%和镍8%的不锈钢是最典型的奥氏体不锈钢，它常被称为18-8不锈钢。这种不锈钢在很宽的温度范围内都具有很高的强韧性，富于延展性，容易轧制和压缩等冷加工，它的耐蚀性和耐酸性，都优于铁素体不锈钢和马氏体不锈钢。添加钼和铜的镍铬系奥氏体不锈钢具有更好的耐蚀性和耐酸性，而且耐盐酸和卤化物腐蚀性也大为改善。除铬镍系奥氏体不锈钢之外，还有铬镍锰系以及不含镍和铬的铁锰铝系奥氏体不锈钢。由于奥氏体不锈钢具有全面、良好的综合性能，在工业上获得了广泛应用。
CAS号：
性质：在常温下具有奥氏体组织的不锈钢。含铬18%和镍8%的不锈钢是最典型的奥氏体不锈钢，它常被称为18-8不锈钢。这种不锈钢在很宽的温度范围内都具有很高的强韧性，富于延展性，容易轧制和压缩等冷加工，它的耐蚀性和耐酸性，都优于铁素体不锈钢和马氏体不锈钢。添加钼和铜的镍铬系奥氏体不锈钢具有更好的耐蚀性和耐酸性，而且耐盐酸和卤化物腐蚀性也大为改善。除铬镍系奥氏体不锈钢之外，还有铬镍锰系以及不含镍和铬的铁锰铝系奥氏体不锈钢。由于奥氏体不锈钢具有全面、良好的综合性能，在工业上获得了广泛应用。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条