1) QT700 crankshaft
QT700曲轴
1.
Three different coatings were used on QT700 crankshaft during laser shock processing.
选用不同涂层对QT700曲轴激光冲击处理,研究激光冲击强化条件下,QT700曲轴的硬度和表面残余应力等力学性能的变化。
2) crank shaft
曲轴曲轴
3) crankshaft
[英]['kræŋkʃɑ:ft] [美]['kræŋk'ʃæft]
曲轴
1.
Simulation on Laser Shock Peening of Crankshaft;
曲轴激光喷丸强化数值仿真
2.
Residual Stress Prediction of the Crankshaft based on Neural Network;
基于神经网络的曲轴残余应力预测
3.
Prediction of Crankshaft Fatigue Crack Growth Pattern by Time Series Analysis;
曲轴疲劳裂纹扩展模式的时序方法预测
4) crank
[英][kræŋk] [美][kræŋk]
曲轴
1.
Continuous flow line combined forging method of single turn crank;
单拐曲轴全流线联合锻造方式浅谈
2.
An lnvestigation on the Surface Crack in the Main Journal of 45 Steel Crank;
曲轴主轴颈表面裂纹原因分析
3.
The Interpolate Algorithm of X-C Two Axes of Crankpin Grinding;
曲轴连杆颈磨削X-C两坐标插补算法
5) crank shaft
曲轴
1.
Repair Technique of the Crank Shafts of 2N45-130/362 Nitrogen-Hydrogen Gas Compressors;
2N45-130/362氮氢气压缩机曲轴修复技术
2.
Discuss on the reason of the crank shaft deformation during cutting;
曲轴车削变形原因的探讨
3.
Design of vibration table in the dynamic equilibrium detection system of crank shaft component;
曲轴组件动平衡检测系统中振动台设计
6) bent axle
曲轴
1.
To the poor stationarity of bent axle and the big vibration after remodeling,we redesign the bent axle.
针对改型后两缸机平稳性差、振动大的特点,我们对曲轴做了重新设计。
2.
To the poor stationarity of bent axle and the poor themal dissipation of the vent-pipe after retrofitting, this text have carried on the theory to analyse and calculate separately, and provide the rational plan of design.
本文针对改型后曲轴的平稳性差及排气管散热性差等,分别进行了理论分析和计算,并给出了合理的设计方案。
补充资料：pesticide emulsifier 700#
分子式：
CAS号：
性质：学名烷基酚甲醛树脂聚氧乙烯醚。为淡黄色或澄黄色油状液体。浊点85～95℃。PH值5～7。水分≤0.5%。易溶于水、醇、苯、甲苯、二甲苯等溶剂。对酸、碱和无机盐溶液稳定。属非离子型表面活性剂，可以复配成混合型农药乳化剂用于乳油加工，也可作为乳化剂、分散剂、悬浮剂用于可湿性粉剂及悬浮剂的加工。
CAS号：
性质：学名烷基酚甲醛树脂聚氧乙烯醚。为淡黄色或澄黄色油状液体。浊点85～95℃。PH值5～7。水分≤0.5%。易溶于水、醇、苯、甲苯、二甲苯等溶剂。对酸、碱和无机盐溶液稳定。属非离子型表面活性剂，可以复配成混合型农药乳化剂用于乳油加工，也可作为乳化剂、分散剂、悬浮剂用于可湿性粉剂及悬浮剂的加工。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条