1) yttrium stearate
硬脂酸钇
1.
The study on technical process and kinetics of PVC heat steadilizer yttrium stearate by saponifying method was carried out.
采用皂化法制备了PVC热稳定剂-硬脂酸钇,并进行了动力学研究。
2) sodium stearate
硬脂酸钠
1.
In-situ preparation of hydrophobic CaCO_3 in present of sodium stearate;
硬脂酸钠原位改性碳酸钙的研究
2.
The rutile nano-TiO2 precoated Al2O3 was modified with sodium stearate.
利用硬脂酸钠对表面包覆氧化铝的纳米TiO2进行了有机表面改性。
3.
Methods: The sodium stearate was selected to modify the magnesia powder,and the modified time,the pH value of solution and temperature for the influence of the modified effect were reviewed.
方法采用硬脂酸钠对氧化镁粉体进行表面改性,考察了浓度、温度和溶液pH值对吸附量的影响。
3) stearic acid
硬脂酸
1.
Study of organic surface modification of nanosized ZnO with stearic acid;
硬脂酸对纳米ZnO的有机表面修饰研究
2.
Mechanistic studies of the effect of stearic acid coated Mg(OH)_2 on properties of EVA/Mg(OH)_2 composites;
硬脂酸改性Mg(OH)_2的机理及对EVA性能的影响
3.
The preparation of nanosized BaSO_4 particles modified with stearic acid;
硬脂酸修饰的纳米硫酸钡的制备
4) calcium stearate
硬脂酸钙
1.
New process for preparation of calcium stearate;
合成硬脂酸钙新工艺研究
2.
Determination of calcium in calcium stearate and zinc in zinc stearate by suspension sampling-flame atomic absorption spectrometry;
悬浮液进样-火焰原子吸收光谱法测定硬脂酸钙中钙及硬脂酸锌中锌
3.
Study of synthesis of calcium stearate by direct method in aqueous medium;
在水介质中直接制备硬脂酸钙
5) lanthanum stearate
硬脂酸镧
1.
Study on Thermal Stabilization Mechanism of PVC by Lanthanum Stearate;
硬脂酸镧对PVC热稳定作用机理的研究
2.
Charging method was partly improved in the technical process for preparing PVC heat steabilizer-lanthanum stearate by saponifying method.
对皂化法制备PVC热稳定剂硬脂酸镧工艺过程中的加料方式进行了部分改进。
3.
The direct synthesis of lanthanum stearate is studied under the reaction of stearic acid to La2O3 in the presence of catalyst.
研究了硬脂酸和氧化镧在催化剂作用下直接合成硬脂酸镧的方法。
6) nickel stearate
硬脂酸镍
1.
Thermochromism of nickel stearate(NiSt_2) and pyrogallic acid(PGA)was reported.
本文报道了硬脂酸镍(NiSt2)和焦性没食子酸(Pyrogallic acid,PGA)的热致变色现象,研究了热敏涂层的显色密度随加热温度和时间的变化关系。
2.
A new thermographic material was studied,in which hydrophilic polyvinyl alcohol(PVA) was used as a binder,nickel stearate was used as a main material and pyrogallic acid was used as a developer.
本文对以水溶性聚乙烯醇(PVA)为粘合剂,硬脂酸镍(NiSt2)为主要原料,焦性没食子酸(PGA)为显影剂的一种新型热成像材料的研究。
补充资料：硬脂酸铅
分子式：Pb(C17H35COO)2
分子量：774.1466
CAS：1072-35-1
硬脂酸铅是白色或微黄色粉末，比重1.323,熔点104-108℃。不溶于水，溶于热的乙醇和乙醚，在空气中能吸收水分，在有机溶液剂中加热溶解后冷却成胶状物。遇强酸分解为硬脂酸和相应的铅盐。
用途: 主要用于不透明的软质和硬质聚氯乙烯制品的稳定剂,也用于硬脂板,管薄膜.薄板.人造革.电线包皮等,油漆的消光剂,润滑油的增重剂,与钡盐和镉盐并用,可提高光.热稳定性和透明度.
包装: 塑料编织袋内衬塑料袋。
贮运：贮存于通风干燥处，防潮、防热，远离火种和腐蚀性物质。搬运时轻装轻放。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条