1) anticorrosive coating
腐涂料
1.
Study on urushiol-metal polymer anticorrosive coating;
漆酚金属高聚物防腐涂料的研究进展
2) anticorrosion coating
防腐涂料
1.
This paper introduced the research advances of polyaniline anticorrosion coatings and different mechanisms of anticorrosion.
介绍了聚苯胺防腐涂料的研究进展及不同的防腐机理。
2.
This paper reviews the application of modified epoxy resin in anticorrosion coatings and the trend of high performance.
综述了改性环氧树脂在防腐涂料中的应用及高性能化的方向。
3) anticorrosive coatings
防腐涂料
1.
This paper analyses the effect of the NM powder material in antisepsis coatings,and also summarizes the na- tional inside and outside development trends and tend of the NM anticorrosive coatings.
本文分析了纳米粉体材料在防腐涂料中的作用。
4) anticorrosion coatings
防腐涂料
1.
Preparation and use study of epoxy modified acrylic self-cleaning anticorrosion coatings;
环氧改性丙烯酸自清洁防腐涂料制备与应用研究
2.
Situation of international competition and development trend of marine and heavy-duty anticorrosion coatings industry;
国际化竞争环境与船舶重防腐涂料行业的发展趋势
3.
Preparation of water-borne self-drying anticorrosion coatings;
水性自干防腐涂料的制备
5) corrosion protective coatings
防腐涂料
1.
An epoxy resin used as waterborne corrosion protective coatings was synthesized by the copolymerization of crylic acid, methyl methacrylate, methyl butyacrylate with styrene in the presence of epoxy organosilicone, which had high hardness, abrasion resistance and adhesion possessed by both organic and inorganic coatings.
利用丙烯酸、甲基丙烯酸甲酯、甲基丙烯酸丁酯与苯乙烯的共聚方法,合成一种新型水性防腐涂料。
2.
The preparation of higher chlorinated polyethylene(HCPE) for coatings in solid phase and its application in corrosion protective coatings has been described.
研究了固相法涂料用高氯化聚乙烯树脂的制备及其在防腐涂料中的应用。
3.
A heat and oil resistant corrosion protective coatings has been developed, which is formulated based on the modified raw lacquer as binder and mixed with various pigments and fillers, and used for the corrosion protection of heat exchanger with hot oil as media.
研制成耐热、耐油防腐涂料。
6) anti-corrosive coatings
防腐涂料
1.
The corrosion and harm therefrom on the metal surface are detailed; the influence factors of metal corrosion are analyzed;the application situation of anti-corrosive coatings and anti-corrosive technologies is introduced;the countermeasures of anti-corrosion and anti-rust of automobile are proposed.
详细阐述了金属腐蚀的现象及危害;分析了影响金属腐蚀的因素;介绍了防腐涂料和防腐技术在客车上的应用现状;提出了客车整车防腐及防锈的措施。
2.
Based on the coating market in great demand and the structure of the coating productions in our country,the business opportunities in the coating market in China are described;the developing trend of the environmentally friendly anti-corrosive coatings in our country is pointed out.
从我国需求旺盛的涂料市场、涂料产品的结构等方面,阐述了我国涂料市场发展的商机;指出环保型防腐涂料的发展方向。
3.
The results indicate that the nano titanium primer/nano titanium finish coating system,modified polyethylene power coatings,inorganic phosphate zinc-rich primer/nano titanium finish coating system are suitable to be used as anti-corrosive coatings for solar w.
结果表明:钛纳米底漆/钛纳米面漆涂料系统、改性聚乙烯粉末涂料、无机磷酸盐富锌/钛纳米涂层(体系)适合应用于碳钢太阳能贮热水箱的防腐涂料,其中,改性聚乙烯粉末涂料耐蚀性能最好。
补充资料：防腐蚀涂料
分子式：
CAS号：
性质：指由底漆至面漆配套的、以防止腐蚀性介质对基材腐蚀为主要功能的涂料体系，当其用于金属底材时往往配套应用防锈底漆。该涂料在被涂基体表面上固化后形成的涂层可通过屏蔽、缓蚀或阴极保护等作用来防止基体腐蚀。其涂层的基本特性是抗水、氧、离子等，阻止渗透性好，对各种腐蚀介质的稳定性好，对被保护基材附着力强，机械性能(硬度、柔韧性、耐冲击、耐磨耗等)优良等。目前主要品种有：环氧树脂防腐蚀涂料(有胺固化环氧、聚酰胺固化环氧、环氧沥青、无溶剂环氧、环氧酚醛、线型环氧等各类)；聚氨酯防腐蚀涂料(有多羟基化合物固化、湿固化、催化湿固化、封闭聚氨酯烘干固化等各类)；橡胶树脂防腐蚀涂料(有氯化橡胶、氯磺化聚乙烯、氯丁橡胶等各类)；乙烯树脂防腐蚀涂料(有过氯乙烯、氯醋共聚树脂、偏氯共聚树脂、聚二乙烯基乙炔等各类)；酚醛树脂防腐蚀涂料；呋喃树脂防腐蚀涂料；生漆及其改性树脂防腐蚀涂料。
CAS号：
性质：指由底漆至面漆配套的、以防止腐蚀性介质对基材腐蚀为主要功能的涂料体系，当其用于金属底材时往往配套应用防锈底漆。该涂料在被涂基体表面上固化后形成的涂层可通过屏蔽、缓蚀或阴极保护等作用来防止基体腐蚀。其涂层的基本特性是抗水、氧、离子等，阻止渗透性好，对各种腐蚀介质的稳定性好，对被保护基材附着力强，机械性能(硬度、柔韧性、耐冲击、耐磨耗等)优良等。目前主要品种有：环氧树脂防腐蚀涂料(有胺固化环氧、聚酰胺固化环氧、环氧沥青、无溶剂环氧、环氧酚醛、线型环氧等各类)；聚氨酯防腐蚀涂料(有多羟基化合物固化、湿固化、催化湿固化、封闭聚氨酯烘干固化等各类)；橡胶树脂防腐蚀涂料(有氯化橡胶、氯磺化聚乙烯、氯丁橡胶等各类)；乙烯树脂防腐蚀涂料(有过氯乙烯、氯醋共聚树脂、偏氯共聚树脂、聚二乙烯基乙炔等各类)；酚醛树脂防腐蚀涂料；呋喃树脂防腐蚀涂料；生漆及其改性树脂防腐蚀涂料。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条