1) scratch test
划痕法
1.
The adhesive power between silicon film and glass substrate is measured by scratch test .
采用APCVD工艺,以SiH4为原料在不同温度的玻璃基板上硅质薄膜的制备,采用划痕法测量薄膜与基板之间的附着力,研究了薄膜附着力随基板温度变化趋势。
2.
Factors of effects on TiN coating adhesion strength dctermined by scratch test have been investigated.
研究了影响划痕法测定 Ti N涂层结合力的因素 ,结果表明 :离子氮化处理能提高 Ti N涂层的临界载荷。
3.
The critical load (Lc) was measured by scratch test with acoustic emission sensor.
对纯钛表面在不同电压下制备了等离子体氧化膜,采用声发射监控的划痕法研究了等离子体氧化膜的临界载荷Lc。
2) scratch method
划痕法
1.
The adhesion property of Au/NiCr/Ta multi-layered metallic films was investigated by the indentation method,rolling contact fatigue method and scratch method with both friction and acoustic emission modes.
针对Al2O3基体上磁控溅射沉积的Au/NiCr/Ta多层金属薄膜,用压痕法、滚动接触疲劳法、摩擦力和声发射两种模式同时监测的划痕法,对比研究了金属薄膜与基体的结合性能。
2.
Au/NiCr/Ta and Au/NiCr metallic multilayers were deposited on A1203 substrate by magnetron sputtering and their critical load (La) was studied by scratch method with friction and acoustic emission mode, moreover, the scratch curve and morphology of metallic films were compared with TiN film.
采用摩擦力和声发射两种模式同时监测的划痕法研究了 Ａｕ／ＮｉＣｒ／Ｔａ和 Ａｎ／ＮｉＣｒ多层金属薄膜的临界载荷 Ｌｃ，并与ＴｉＮ硬质薄膜进行了对比。
3) single-pass pendulum scratching test
单摆划痕法
1.
In order to extend its application scopes,this paper introduces the principle of single-pass pendulum scratching test and its applications to test wear resistance of conventional metallis materials,ductile-brittle transition of quasi-brittle materials,wear resistan.
单摆划痕法是一种新型摩擦磨损测试方法,它具有动态加载特性,可从力和能量两个方面获得表层材料破坏过程信息。
4) single pendulum scratching test
冲击划痕法
1.
A new method,single pendulum scratching test, as well as the tester, to evaluate adhesive strength between plating and substrate is introduced.
介绍了一种评价镀（涂）层结合强度的新方法——单摆冲击划痕法。
5) scratch testing
划痕试验法
1.
In all practical methods in determining the interfacial adhesion and bond strength between thin film coating and substrate, especially between hard thin film coating and substrate, scratch testing is the only one widely used.
薄膜-基体界面结合性能是直接关系到膜-基体系最终使用性能和可靠性的关键因素和首要指标 划痕试验法是唯一广泛应用于测量硬质薄膜-基体界面结合强度的实用的检验方法 文中给出划痕试验法表征薄膜涂层界面结合强度的原理、方法与过程,以及临界载荷Lc的确定方法,分析影响临界载荷Lc和压头与薄膜-基体组合体之间摩擦系数μ因素 最后,介绍了常用划痕试验检测的薄膜体系及其特点与划痕形
6) scratching hardness test
划痕测硬法
补充资料：皮肤划痕现象
皮肤划痕现象
了解躯体各部皮肤血管及脊髓反射中枢机能的一种检查方法。用骨针或其他代替物在皮肤上划痕。可表现为以下情况：①白色划痕反应，说明局部毛细血管处于收缩状态；②红色划痕反应，说明局部毛细血管处于扩张状态；③反射性皮肤反应，如划过处表现红晕、宽度超过3厘米，时间超过10分钟为异常反应。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条