说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 氩
1)  argon [英]['ɑ:ɡɔn]  [美]['ɑrgɑn]
1.
Thermal conductivity of single-wall carbon nanotubes filled with argon;
填充后单壁碳纳米管的导热系数
2.
Clinical Study on the Relationship Between Ice Ball Size and Freezing Time in Argon-Helium Cryoablation;
氦刀冷冻时间与冰球大小的临床研究
3.
Clinical effect of argon plasma coagulation in endoscopic treatme nt of Barrett esophagus;
离子凝固术治疗巴瑞特食管的临床观察
2)  Ar
1.
The research about the wettability time-effect of the cotton treated by the Ar plasma jet in the atmospheric pressure;
等离子体喷枪等离子体辐照棉织物后亲水性“即时效应”的研究
2.
Light emissions from Na and K vapors was observed in the lower temperature than 1 000 K when Ar or He gas flows around Na or K.
将钠和钾加热到一定的温度以上并使稀有气体的气或氦气在其周围以一定的速度流动 ,就可以观察到这些梯度诱发的萤光 ,其发光机理有待研究。
3)  Ar-Ar age
氩-氩年龄
4)  Ar-Ar
氩-氩法
5)  blowing argon
吹氩
1.
2 slab caster of Meishan Steel,the influence of casting speed,immersion depth of nozzle and blowing argon flowrate on bubble distribution in the mold was investigated by using water model.
根据物理模拟结果对吹气量进行了优化,得到了吹量与结晶器通钢量的定量关系式,并在大生产中进行了应用。
2.
The interfacial behavior between fluid steel and molten slag layer in a slab continuous casting mold with blowing argon gas was described using the VOF (volume of fluid) method and Lagrange multi-phase flow model,and the prediction was validated by the water model.
利用VOF方法和Lagrange两相流模型描述了吹结晶器内钢/渣界面行为,并用水模型实验检验了数值模拟结果。
3.
By adopting the measures such as discharging at high temperature, blowing argon and stewing treatment, the inclusion in high carbon Si-Mn cast steel can reduce obviously, its content can be controlled under 0.
采用钢液高温出炉、吹处理以及吹后静置处理等工艺措施,可以明显减少高碳硅锰铸钢中的夹杂物,夹杂物含量可以控制在0。
6)  argon gas
氩气
1.
On-line analysis of trace water and oxygen in argon gas;
气中微量氧和水的在线分析
2.
Based on the working principles of gas chromatograph, DHP-05 type argon purity analyzer is applied to take overall analysis on the impurity gases of H2、O2、N2、CH4、CO、CO2 in the argon gas generated in air separator.
根据气相色谱分析的工作原理,运用DHP-05型气纯度分析仪对空分设备提取中的杂质气体—H2、O2、N2、CH4、CO、CO2进行全分析,通过对多年的气分析实践经验进行总结,阐述了气流波动、有机物变化、极化电压等各因素对气纯度分析的影响情况,并针对各因素的性质和特点,分别采取相应的措施进行调整和处理,从而找到气纯度分析的最佳工作条件,对仪器的一些不足之处进行了相应的改进,提高了气分析的准确性、重复性和及时性。
3.
The ion nitriding process with argon gas passing through hot-work die steel H13 was stated.
介绍了将气通入热作模具钢—H13钢的离子渗氮过程,用体视显微镜、光学显微镜、硬度计及X衍射分析仪等仪器,分析了气氛离子渗氮对H13钢渗层及其热疲劳性能的影响。
补充资料:

argon
    一种化学元素   。化学符号Ar  ,原子序数18  ,原子量39.948,属周期系零族,为稀有气体的成员之一。1784年英国H.卡文迪什曾从空气中获得氩,但未确认。1894年英国瑞利和W.拉姆齐重复了卡文迪什的实验,并用光谱分析证实这种气体是一种新元素,取名argon。含义是“懒惰”。氩在地球大气中的含量为0.934%   ,有3种同位素:氩40、氩36、氩38。氩是无色、无臭、无味的气体,熔点-189.2℃,沸点-185.7℃,气体密度1.784克/升(0℃,1×105帕),在水中的溶解度33.6厘米3/千克水 。氩可由液态空气分馏制得。氩不能燃烧,也不助燃,用作电弧焊接不锈钢、镁、铝的惰性保护气体。也作为惰性气体填充日光灯、电灯泡、光电管等,延长灯丝寿命。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条
氩弧