1) fluoroether rubber
氟醚橡胶
1.
Property and application of fluoroether rubber;
氟醚橡胶的性能及其应用
2.
The compatibility of fluoroether rubber and fluorosilicone rubber blends has been studied using vulcameter,dynamic mechanical thermal analysis(DMTA)and differential scanning calorimetry(DSC).
通过硫化仪、动态机械热分析仪和示差扫描量热仪,考察了氟醚橡胶与氟硅橡胶的共混相容性。
3.
The effects of different amounts of graphite,carbon fiber,PTFE and their blending on the properties of friction and abrasion of fluoroether rubber were studied.
研究了石墨、碳纤维和聚四氟乙烯不同用量和三者并用对氟醚橡胶摩擦磨损性能的影响,并用SEM对橡胶磨损表面形貌进行了分析。
2) perfluoroelastomer
全氟醚橡胶
1.
time was measured at 5 different temperatures,according to Chinese National Standards,the storage life of perfluoroelastomer was 207 years when temperature was 303K and y_0 was 0.
全氟醚橡胶是一种性能优异、价格昂贵的弹性体材料,应用于军事、航空航天和半导体等尖端科技领域。
3) ECO
[英]['i:kəʊ] [美]['iko]
氯醚橡胶
1.
Development of lead free and ETU free vulcanization System for ECO;
无铅无乙基硫脲氯醚橡胶硫化体系的开发
2.
Study on ECO/NBR blends;
氯醚橡胶/NBR并用胶的性能研究
3.
Properties of ECO/NBR Blends;
氯醚橡胶／丁腈橡胶共混物性能的研究
4) epichlorohydrin rubber
氯醚橡胶
1.
Structure and properties of epichlorohydrin rubber/nitrile rubber blends;
氯醚橡胶/丁腈橡胶共混物的结构与性能
2.
The covulcanizability of epichlorohydrin rubber (ECO) and nitrile r ub ber(NBR),effect of amount of covulcanizer on the mechanical and air aging proper ties,oil resistance of ECO and NBR were studied.
研究了二元共聚氯醚橡胶(ECO)与丙烯腈质量分数为41%的丁腈橡胶(NBR)的共硫化性以及共硫化剂用量对ECO/NBR物理机械性能、耐老化性能、耐油性能的影响。
3.
Blending of sulfonated butyl rubber(IIR)ionomers with styrene -butadiene bl ock copolymer(SBS),polypropylene,high density polye thylene,epichlorohydrin rubber or cis-1,4-polybutadiene was studied.
研究了磺化丁基橡胶(IIR)离聚体与苯乙烯-丁二烯嵌段共聚物、聚丙烯、高密度聚乙烯、氯醚橡胶及顺丁橡胶的共混。
5) CO
氯醚橡胶
1.
Study on Properties of NR/NBR/CO Vulcanizates;
NR/NBR/氯醚橡胶三元共混物性能的研究
2.
Study on Adhesion between Nylon Silk and CO for Aero Film;
航空薄膜用锦丝绸与氯醚橡胶粘合性能的研究
3.
Study on the Properties of FKM/CO Blends
氯醚橡胶/氟橡胶共混物性能的研究
6) fluorine rubber
氟橡胶
1.
Adhesion properties and mechanism of epoxy adhesive in bonding fluorine rubber to metal;
氟橡胶-金属黏接用环氧树脂胶黏剂的黏接性能与黏接机理
2.
Advance in bonding metal to fluorine rubber;
氟橡胶与金属黏接的研究进展
3.
We adopted a newly epoxy resin prepared by 4,4'-dihydroxydiphenyl sulfone and epoxy E-51,developed a newly epoxy adhesive for bonding fluorine rubber to metal,studied adhesion properties and endurance of the adhesive systematically.
用4,4’-二羟基二苯砜与E-51反应制备的树脂配制了可直接用于氟橡胶与金属粘接的新型环氧树脂胶粘剂,系统研究了胶粘剂的粘接性能及耐久性。
补充资料：氟醚橡胶
分子式：
CAS号：
性质：全氟烷基乙烯基醚、四氟乙烯和少量含硫化点单体组成的三元共聚弹性体。耐化学药品性优异，除氟化溶剂外，不受任何介质影响，与聚四氟乙烯相似。耐热性好，288℃下长期使用，短期使用温度高达315℃，脆性温度-39℃，物理机械性能与氟橡胶26相似，化学药品性和气体的渗透性小，电性能好。适用于耐高温耐强腐蚀介质，耐极大多数溶剂的橡胶密封剂和橡胶制品。
CAS号：
性质：全氟烷基乙烯基醚、四氟乙烯和少量含硫化点单体组成的三元共聚弹性体。耐化学药品性优异，除氟化溶剂外，不受任何介质影响，与聚四氟乙烯相似。耐热性好，288℃下长期使用，短期使用温度高达315℃，脆性温度-39℃，物理机械性能与氟橡胶26相似，化学药品性和气体的渗透性小，电性能好。适用于耐高温耐强腐蚀介质，耐极大多数溶剂的橡胶密封剂和橡胶制品。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条