1)  sol-gel
溶胶-凝胶合成工艺
2)  sols
溶胶
1.
Synthesis of MoO3 nanobelts with no template via a simple hydrothermal method from peroxomolybdic acid sols was reported.
以过氧钼酸溶胶为反应前驱体采用简单的水热方法,在没有任何模板剂的条件下合成三氧化钼纳米带,通过XRD,SEM,TEM和IR等测试方法对产物进行结构表征和形貌分析。
2.
Translucent SiO_2 sols are prepared from TEOS using NH_3·H_2O as catalyzer,polyelectrolyte/ SiO_2 composite films are fabricated via electrostatic self-assembly multilayer method,and SiO_2 thin films are formed by heat-treating the polyelectrolyte/SiO_2 composite films to eliminate the polyelectrolyte and other components in compos- ite films.
以氨水为催化剂,通过水解正硅酸乙酯制备了乳白色二氧化硅溶胶,采用静电自组装薄膜技术制备了聚电解质/二氧化硅复合薄膜,并通过热处理制备了二氧化硅薄膜。
3.
The average thickness of the interface layer wrapped about sols usually is determined by fitting the Porod curve that shows a negative deviation from Porod's law.
溶胶界面层厚度通常是用Porod法对高角区负偏离的Porod曲线进行拟合求算 ,但本文研究表明还可通过分别测定Porod负偏离校正前后体系粒子的平均半径之差而获得平均界面厚度 。
3)  Colloid
溶胶
1.
A Simple Method for Preparation of Nano-Pd Colloid;
一种制备纳米级Pd溶胶的简易方法
2.
A method of gathering and enhancing of microbial flocculants(MBF) was established,in which the FeO(OH)colloid was loaded MBF from the fresh activated sludge which came from biochemical treatment of beer wastewater and needn’t culture in any specially prepared nutrient medium.
研究了 pH值、调pH值的时机、上清液与水合氧化铁溶胶投量比以及Ca2 + 的存在对脱色效果的影响 ,结果表明 :pH值为 10 ;上清液与水合氧化铁溶胶投量比为 1 5 ;pH值的调节在FeO(OH)溶胶加入之前 ,直接黄染料 (DY4 )的最高脱色率达 98 7%。
3.
The acid-treated MWNTs can be dispersed into water to form very stable black aqueous colloids with the help of ultrasonication.
在超声作用的帮助下可以把这种酸处理的多壁碳管分散在水中形成一种黑色的水溶胶 。
4)  sol
溶胶
1.
UV screening property of cotton fabric treated with TiO_2/SiO_2 nano composite sol;
纳米TiO_2/SiO_2复合溶胶处理棉织物的抗紫外性能
2.
Studies on viscosity properties of dioxane-lignin sol;
二氧六环-木素溶胶粘度特性的研究
3.
Study on non-fluoro water repellent finish of cotton fabric by sol-gel progress;
棉织物溶胶-凝胶法的无氟拒水整理研究
5)  collosol
溶胶
1.
Selection of Conducting Solution During Testing z Potential of Fe(OH)_3 Collosol;
Fe(OH)_3溶胶ζ电位测定中导电液的选择问题
2.
Preparation of Cyclodextrin Polymer Glass Capillary Column by Collosol Adsorption Method;
溶胶吸附法制备β环糊精聚合物玻璃毛细管柱
6)  colloidal solution
溶胶
参考词条
补充资料：陶瓷基复合材料溶胶-凝胶工艺
分子式：
CAS号：

性质：将含有多种组分的溶液，通过物理或化学的方法，使分子或离子成核制成溶胶，在一定条件下，再经凝胶化处理，获得多组分的复合相的凝胶体，经烧结后可获得所需组分的陶瓷基复合材料。采用溶胶凝胶法制备复合材料，通常有两种：一是先制得复合陶瓷粉末，经成型，烧结而获复合陶瓷材料；二是将复合的溶胶相经凝胶化合直接烧结制得整块陶瓷基复合材料。   

说明：补充资料仅用于学习参考，请勿用于其它任何用途。