1) penalty function
罚函数
1.
According to the work condition of one 1450 five-stand tandem cold mill,reduction distribution as decision variable,the penalty function was established,in which rolling pressure distribution ratio was as objective function and the constraint condition of reduction distribution was as penalty term.
根据某1450五机架冷连轧机生产工况,以压下量分配为自变量,以轧制力成比例分配为目标函数,将压下量分配的约束条件作为惩罚项,建立惩罚函数。
2.
The penalty function algorithm is utilized to meet the requirements of essential boundary conditions because the shape function of EFGM fails to satisfy conditions.
将一种新的数值方法无网格伽辽金法(EFGM)用于刚塑性可压缩材料稳态轧制过程的模拟,由于形函数不满足插值条件,采用罚函数法满足本质边界条件;为提高精度,选用矩形影响域的张量积核函数;利用有限元背景网格作为积分单元,对求解域内和边界上采用不同的高斯积分方案·数值计算结果与刚塑性有限元的计算结果和文献中的实验数据吻合较好,说明无网格伽辽金法用于刚塑性可压缩材料轧制过程的可行性和正确性
3.
The penalty function is adopted to impose the essential boundary condition, the tensor product weight function with a rectangular influence domain is chosen, and the finite element background cell is considered as the integration unit.
将无网格再生核质点法(RKPM)用于刚塑性可压缩材料轧制过程的模拟,采用罚函数满足本质边界条件,选用矩形影响域的张量积核函数,利用有限元网格作为积分单元,对求解域内和边界上采用不同的高斯积分方案。
2) penalty functions
罚函数
1.
Non-differentiable accurate penalty functions were chosen in treating the constraint equation and the advantages of simulated annealing algorithm was used for reference in determining penalty param.
使用罚函数法对优化模型所包含的约束方程进行转化和处理,使之适用于遗传算法。
2.
By use of penalty functions,an optimization problem with constraints is converted to non-constraint one to establish the combined optimal monitoring model for dam safety.
大坝安全的组合优化监控模型实际上为一带约束的优化问题,将DNA遗传算法应用于大坝安全监控领域中,用罚函数法将有约束的优化问题转换为无约束的优化问题,建立了大坝安全监控的组合优化模型。
3.
Combined with penalty functions,the strategy can guarantee the particles to search in or around the feasible solutions area.
该算法以粒子群算法为基础,提出了新的修补策略对违反各种约束条件的粒子进行积极的修正,并与罚函数技术相结合,使粒子尽可能地在可行解区域或尽量接近可行解的区域内寻优。
3) punishment function
罚函数
1.
A numerical procedure on optimization of minimal time,180 deg reversal of the velocity vector maneuver is then established,in which a punishment function is defined to handle the constraints,and the conjugate gradient method is employed .
用罚函数处理约束条件 ,用共轭梯度法对飞机的最短时间 1 80°航向转弯进行了寻优计算 ,优化结果接近于六自由度仿真结
2.
This model with complex constraints is transformed into that with simple constraints by punishment function.
考虑应急设施选址时的成本和应急时间因素,给出了多目标应急设施选址问题的模型,通过设置罚函数将该多约束问题转化成易于计算机求解的简单约束模型,进而在初始解的选取、温度参数的控制、可行解的迭代策略和算法终止条件等方面为之设计了模拟退火算法,并通过仿真证明了该算法的有效性。
4) SUMT
罚函数法
1.
This paper adopt SUMT,set the mill′s relatively use of power as the optimization goal.
本文运用罚函数法,以冷连轧机组轧制时电机功率的等相对负荷为目标函数,并用单纯形法进行了加速,所得的轧制规程能够充分地利用现有轧机的生产能力,提高轧机的利用率,为该类型轧机设计提供参考。
5) penalty function
惩罚函数
1.
Research on multi-modal smooth transition strategy based on penalty function;
基于惩罚函数的多模态平稳过渡策略研究
2.
The Multi-object Path Planning Based on Penalty Function NPGA;
基于惩罚函数NPGA的多目标路径规划
3.
The Dynamic Object Path Planning Based on Penalty Function Niche Pareto Genetic Algorithm;
基于惩罚函数NPGA的足球机器人动态目标规划
6) penalty method
罚函数法
1.
Half penalty method and optimism design of ten connecting bar mechanism of plunger slide in double action drawing press;
半惩罚函数法与内滑块十杆机构的优化设计
2.
The essential boundary condition is imposed by employing a penalty method.
将选择施加在"虚结构"控制点上的虚载荷作为形状优化的设计变量,并将它与无网格Galerkin法相结合来开展结构形状优化研究,采用罚函数法来施加边界条件,通过直接微分法建立了结构形状优化的离散型灵敏度分析算法,利用无网格法研究了节点坐标关于设计变量导数的计算。
3.
By using penalty method,Sobolev space,variational approach,partial differential equations,and function analysis theory,the optimal problem and the existence of the solution of the optimal regularized problem are obtained.
首先给出近似解定义,利用罚函数法和Sobolev空间、变分法、偏微分方程、泛函分析等理论得出最优正则化问题解的存在性,并且以变分不等式的形式给出最优化成立的必要条件。
补充资料：赕罚
1.古代统治者向南方少数民族以赎罪的名义征敛财物。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条