1) equal-thickness housing
等厚度机架
2) equivalent thickness
等效厚度
1.
To study the equivalent thickness,and effects of superposition throttle slices to damper characteristics,the bending deformation is analyzed at the throttle mouth radius r_k,and the equivalent thickness formula deduced.
为了探究减振器叠加阀片等效厚度、设计方法及其对减振器特性的影响,对节流阀片在阀口位置的弯曲变形量和叠加阀片等效厚度进行了研究,给出了等效厚度计算公式。
2.
An equivalent thickness conception is proposed to consider the crack closure effects and the three-dimensional stress constraints along the crack front by use of the theory obtained for the straight through thickness crack.
提出了等效厚度的概念,利用穿透直裂纹的研究结果,考虑表面裂纹扩展中塑性致闭和三维应力约束效应。
3.
Through finite element analysis on point-supported midhollow glass with various thicknesses,the value of equivalent thickness of mid-hollow glass given in Technical Specification for Point Supported Glass Curtain Wall is revised and corresponding revised coefficient is given.
在试验的基础上,通过对不同厚度点支式中空玻璃的有限元分析,对现行的《点支式玻璃幕墙工程技术规程》(CECS127:2001)关于中空玻璃等效厚度取值进行了修正,给出了修正系数,同时也给出了点支式中空玻璃最大应力和最大位移的建议计算公式。
3) spherical vessels
不等厚度
1.
On the basis of practical loadsupporting condition of large scale spherical vessels for water or oil storage,the integral hydorbulge forming technology of nonuniform thickness spherical vessels and a new method for measuring strain on inner surface of spherical vessels are discussed in this paper,and they are proved to be successful by means of experiment study.
本文根据大型储水、油球罐的实际受力情况提出了不等厚度球罐的整体无模成形工艺，并通过实验获得了成功。
5) relative isohyse
等厚度线
6) effective thickness
等效厚度
1.
The coefficient ξ of shear force ratio is made in equation about laminated glass effective thickness.
计算夹层玻璃等效厚度时引入了剪力比系数ξ,即同样载荷条件下,夹层玻璃层间应力与同样尺寸、厚度的单片玻璃中性层最大剪应力之间的比值。
2.
The effective thickness and deflection of laminated glass with different interlayer thickness and fixed glass thickness were analyzed using uniform pressure tests.
采用负压加载的方法,研究了在均布载荷下夹层玻璃板等效厚度和挠度随中间层胶片厚度变化的规律,夹层玻璃结构为两片1000mm×1000mm厚度5mm的单片玻璃,中间层为一定厚度的胶片。
补充资料：长等短等
1.犹言左等右等。谓等待久。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条