1) refined oil
精炼油
1.
Application of membrane separation technique could improve the quality of refined oil and soybean protein isolate,prevent producing alkali washed wastewater,and high quality soybean lecithin,lysophosphatide and soybean oligosaccharide were obtained.
膜技术的应用提高了精炼油、分离蛋白的品质,杜绝了碱炼废水的产生,治理了乳清废水达标排放的问题,同时得到了高品质的大豆磷脂、溶血磷脂及副产物大豆低聚糖等,为大豆精深加工膜技术产业化奠定了基础。
2) refined fat
精炼油脂
3) refining
精炼
1.
The comparison between gold electrolysis and solvent extraction refining process;
金电解与溶剂萃取精炼工艺比较分析
2.
Fast refining process of continuous casting liquid steel;
连铸钢水快速精炼工艺实践
3.
Optimization of LF refining process and slag for low carbon aluminum containing steel;
低碳含铝钢LF炉精炼工艺及精炼渣的优化
4) refinement
精炼
1.
Craft and application of the AOD refinement for high strength low metal alloy steel;
AOD精炼高强度低合金钢工艺及应用
2.
Study on extraction and refinement of grape seed oil;
葡萄籽油的提取和精炼工艺研究
5) refine
精炼
1.
The Refine Process Control in Ladle Furnace (LF) Based on Mathematical Model;
基于数学模型的钢包精炼炉过程控制
2.
Results show the refined cherry kernel oil is transparent with enjoyable flavor and odor,and the acid value and phospholipin content of the refined cherry kernel oil reduce remarkably and the peroxide value rises appreciably.
对樱桃仁油的精炼方法和工艺条件进行了研究,采用水化脱胶、碱炼脱酸、活性炭脱色和真空蒸汽脱臭的方法制得了精炼樱桃仁油。
3.
The paper studied the influence which AZ91 magnesium alloy scraps were refined with flux of different composition content.
试验了熔剂组分的不同配比对AZ91镁合金废料精炼效果的影响,通过对精炼后得到的镁合金试样的金相显微观察,判断熔剂组分的最佳配比方案。
6) refining process
精炼
1.
A new mathematical model used for forecasting molten steel temperature during LF refining process was established on the basis of heat transfer principle with theoretical analysis.
以钢水和炉渣为研究体系 ,通过对 L F炉精炼过程中能量收入和损失的系统分析 ,根据体系的能量平衡规律推导出 L F炉精炼过程钢水的升温速率数学模型。
2.
In ladle furnace refining process, temperature and component control are the two masterstroke from the beginning to the end.
在LF炉精炼过程中,温度及成分控制始终是两条主线。
参考词条
补充资料：皂化溶解油、肥皂油和调水油
分子式：
CAS号：
性质：又称皂化溶解油、肥皂油和调水油。金属切削油的一类。一般是淡褐色至深褐以液体或半固体。由在矿物油中加入适量的皂类乳化剂（如钠皂、钾皂、松香钠皂、松香皂或环烷酸钠皂）和少量稳定剂（如乙醇或甲醇）而成。使用时与软水掺合成稳定的白色乳化液。作用以冷却为主，润滑为次。用于车制、锯断、钻孔、磨制等金属粗加工。
CAS号：
性质：又称皂化溶解油、肥皂油和调水油。金属切削油的一类。一般是淡褐色至深褐以液体或半固体。由在矿物油中加入适量的皂类乳化剂（如钠皂、钾皂、松香钠皂、松香皂或环烷酸钠皂）和少量稳定剂（如乙醇或甲醇）而成。使用时与软水掺合成稳定的白色乳化液。作用以冷却为主，润滑为次。用于车制、锯断、钻孔、磨制等金属粗加工。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。