1) inversion casting
反向凝固
1.
Influence of element diffusion on interface in compound strips during the inversion casting and high temperature rolling;
反向凝固与高温轧制过程中元素互扩散对复合界面的作用
2.
Experimental study of inversion casting of copper clad steel;
铜/钢反向凝固复合实验研究
3.
Inversely,the inversion casting process and the electromagnetic concasting process have an advantage in competition,but their processes are imperfect and needed to make further improvement.
反向凝固法和电磁连铸法具有很强优势,但工艺还不成熟,有待进一步深入研究。
2) Inverse casting
反向凝固
1.
According to continuum model, the mathematical model of flow and heat transfer in inverse casting crystallizer was built.
根据连续统一模型建立了描述反向凝固结晶器中的流动与传热的数学模型,计算出了反向凝固结晶器中母带厚度的变化规律,并进一步研究了反向凝固主要工艺参数对母带厚度变化的影响情况。
2.
A steady state, two-dimensional numerical model is undertaken to describe coupled liquid steel's turbulent flow and heat transfer with solidification for the Fe-C binary alloy in a crystallizor of inverse casting.
针对 Fe-C二元合金,建立了描述反向凝固器内伴随相变的湍流流动和传热过程的二维稳态数学模型。
3.
A one-dimensional continuum model has been developed to describe heat transfer with phase transformation under experimental condition in a crystallizor of inverse casting.
建立了描述实验条件下反向凝固器中的相变传热过程的一维数学模型，计算结果与实验数据基本吻合。
3) inversion solidification
反向凝固
1.
Production of H90-steel-H90 clad coil by inversion solidification;
反向凝固法生产H90-钢-H90复合带
2.
Microstructure and Properties of H90 steel Cladding Strip in Inversion Solidification;
H90/钢反向凝固复合带的组织与性能
4) inversion casting strips
反向凝固薄带坯
5) continuous casting/inversion casting
连续铸造/反向凝固
6) directional solidification
定向凝固
1.
The asymptotic analysis of interfacial stability with surface tension anisotropy for directional solidification of alloys;
各向异性作用下合金定向凝固界面稳定性的渐近分析
2.
Effect of Al-Cu alloys diameter on thermal gradient and primary dendrite arm spacing during directional solidification;
试样直径对Al-Cu合金定向凝固温度梯度和一次枝晶间距的影响
3.
Study of the TiNi shape memory alloy prepared through directional solidification;
定向凝固制备TiNi形状记忆合金的研究
补充资料：反向凝固
反向凝固
inversion solidification
fanx旧ng ninggu反向凝固(inversion Solidifieation)一种薄带连续铸钢工艺。从示意图上可看出该工艺是利用一条薄带(冷轧、热轧均可)作为母带，母带经一定的处理后从反向凝固器的底部穿过，反向凝固器存放保有一定过热度和一定溶池高度的钢液，母带以一定速度不停地由下向上运动通过钢液，此时在母带表面上产生钢的凝固生长，并带动一部分钢液粘附其上共同上升，当钢带离开钢液熔池后，利用安置在反向凝固器上方的一对铸轧辊对钢带表面进行平整、轧制，铸轧辊起到拉坯和促进凝固层与母带之间焊合的作用，在铸轧辊后面安放普通的带钢轧机组生产出薄带。反向凝固最大的优点是能够生产复合材料即生产凝固层钢种与母带钢种不同的特殊要求的带钢。鬃 (姚留材)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条