1) latex interpenetrating polymerization
互穿网络聚合
1.
The methods to prepare the waterborne silicon-contained polymer,in terms of seed emulsion polymerization,core-shell emulsion polymerization,emulsifier-free emulsion polymerization,microemulsion polymerization,latex interpenetrating polymerization and et al,are discussed.
介绍了种子乳液聚合、核/壳乳液聚合、无皂乳液聚合、微乳液聚合、互穿网络聚合等制备水性含硅聚合物的方法,并对水性含硅聚合物涂料的应用做了探讨。
2) interpenetrating polymer networks
互穿网络聚合物
1.
Studies on the mechanical property of PDAAM/PU interpenetrating polymer networks;
PDAAM/PU同步互穿网络聚合物的力学性能
2.
A new method was advocated to design distribution of gradient component in gradient interpenetrating polymer networks(IPNs), gradient IPNs of different number of layers were prepared by means of casting layer by layer, and their tensile properties were studied.
提出一种新的方法对梯度互穿网络聚合物(IPNs)中梯度组分的分布进行设计,并采用逐层浇注的方法制备了不同层数的环氧树脂/聚氨酯(EP/PUR)IPNs,对其拉伸性能进行了研究。
3.
Poly(propylene carbonate) polyurethane/poly(methylmethacraylate) interpenetrating polymer networks(PPCPU/PMMA IPNs) was synthesized by simultaneous methods.
用同步法合成了聚碳酸亚丙酯聚氨酯 /聚甲基丙烯酸甲酯互穿网络聚合物 (PPCPU/ PMMA IPN) ,调节 IPN中两组分配比制备出多种高聚物合金。
3) interpenetrating polymer network
互穿聚合物网络
1.
Synthesis and damping properties of polyacrylate latex interpenetrating polymer networks;
丙烯酸酯系胶乳互穿聚合物网络的合成及阻尼性能
2.
Processability and mechanical properties of EA/St-AN interpenetrating polymer networks;
EA/St-AN互穿聚合物网络的加工和力学性能
3.
Structure and damping properties of butyl rubber/poly(styrene-methyl methacrylate) interpenetrating polymer network;
丁基橡胶/聚(苯乙烯-甲基丙烯酸甲酯)互穿聚合物网络的结构与阻尼性能
4) Interpenetrating Network
互穿聚合物网络
1.
This paper reviewed the worldwide advances of polymer damping materials featured of interpenetrating network developed in the past few years.
综述了近年来国内外有关阻尼材料的研究成果,提出互穿聚合物网络(IPN)作为一种阻尼材料,具有其他类型高分子材料不能比拟的优势,同时展望了IPV阻尼材料的研究前景。
5) interpenetrating polymer network
互穿网络聚合物
1.
Some new studies on the toughening methods of epoxy resin,such as interpenetrating polymer network,thermoset liquid crystal polymer,core-shell polymer and nano-particles,and their recent progress were introduced in detail in this paper.
介绍了近几年来研究较为深入的互穿网络聚合物(IPN)、热致液晶聚合物(TLCP)、核壳聚合物(CSP)、纳米粒子等几种增韧环氧树脂的方法及其最新进展。
2.
A series of rigid interpenetrating polymer network(IPN) foams,based on polyurethane(PU) and epoxy resin(EP),were prepared by a simultaneous polymerization technique.
采用同步法合成了聚氨酯/环氧树脂互穿网络聚合物(PU/EP IPN)硬质泡沫,对机械性能进行了研究。
3.
Four kinds of grafted interpenetrating polymer networks(IPNs) were obtained from castor oil,toluene diisocyanate(TDI),monohydroxy-terminated acrylic (or methacrylic ) prepolymer and /or acrylic(methacrylic) monomer in the presence of dibutyltin dilaurate and redox initiators.
由蓖麻油、甲苯二异氰酸酯(TDI)、单端羟基(甲基)丙烯酸酯预聚物及/或(甲基)丙烯酸酯单体出发,在二丁基二月桂酸锡及氧化还原引发剂存在下合成了四种接枝型互穿网络聚合物(IPN)。
6) interpenetrating polymer networks
互穿聚合物网络
1.
Study on cyanate ester/polymer methyl methacrylate interpenetrating polymer networks;
氰酸酯/聚甲基丙烯酸甲酯互穿聚合物网络的探究
2.
Structure and properties of interpenetrating polymer networks materials with wide-temperature range and excellent damping properties;
宽温域高阻尼互穿聚合物网络材料的结构与性能
补充资料：互穿网络
分子式：
CAS号：
性质：由两种或多种互相贯穿的交联聚合物组成的共混物。至少一种组分是在另一种组分存在下聚合或交联的。化学交联使两种或多种聚合物链互相缠结，引起强迫互容，达到抑制热力学上相分离的倾向，形成较精细的共混物结构。IPN有下列几种类型：(1)完全IPN，两种聚合物均为交联网络；(2)半IPN，一种聚合物是交联网络，另一种聚合物是线型的；(3)乳液IPN，由两种线型弹性乳胶混合凝聚交联制成；(4)梯度IPN，组成不均一的IPN；(5)热塑IPN，物理交联聚合物共混物。
CAS号：
性质：由两种或多种互相贯穿的交联聚合物组成的共混物。至少一种组分是在另一种组分存在下聚合或交联的。化学交联使两种或多种聚合物链互相缠结，引起强迫互容，达到抑制热力学上相分离的倾向，形成较精细的共混物结构。IPN有下列几种类型：(1)完全IPN，两种聚合物均为交联网络；(2)半IPN，一种聚合物是交联网络，另一种聚合物是线型的；(3)乳液IPN，由两种线型弹性乳胶混合凝聚交联制成；(4)梯度IPN，组成不均一的IPN；(5)热塑IPN，物理交联聚合物共混物。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条