1) plasma arc overlaying weld
等离子弧堆敷
2) plasma arc coating
等离子电弧敷层
3) plasma arc surfacing
等离子弧堆焊
1.
Under the extra-longitudinal magnetic-field,the plasma arc surfacing was carried out on low carbon steel.
在外加磁场情况下对低碳钢表面进行等离子弧堆焊,通过对堆焊层硬度和磨损量测试以及其显微组织分析,研究磁场频率对堆焊层金属的硬度和耐磨性的影响规律。
2.
A longitudinal magnetic field is applied during low carbon steel plasma arc surfacing.
对低碳钢表面进行等离子弧堆焊时外加纵向磁场,得出了磁场强度对堆焊层金属的硬度和耐磨性的影响规律;电磁搅拌能够细化堆焊层金属的组织,控制硬质相的形态及分布,从而可提高堆焊层金属的综合力学性能。
3.
The effect of electromagnetic stirring on the microstructure and properties of surfacing metal during the applied longitudinal intermittent alternative magnetic field on low carbon steel with plasma arc surfacing are investigated and discussed.
对低碳钢表面进行等离子弧堆焊时外加间歇交变纵向磁场,研究了电磁搅拌对堆焊层金属组织及性能的影响,并利用光学金相、X射线衍射、显微硬度和湿砂橡胶轮磨损试验等手段对试样进行测试分析。
4) Plasma-arc surfacing
等离子弧堆焊
1.
Study on nickel-based composite powders by plasma-arc surfacing;
等离子弧堆焊镍基复合粉末涂层材料
5) plasma surfacing
等离子弧堆焊
1.
The microstructure of Co-Cr-W alloy plasma surfacing has been investigated using metallurgical phase, X-ray diffraction, SEM and TEM.
用金相显微镜,X 射线衍射(XRD),扫描电镜(SEM),透射电镜(TEM)和 X 射线能谱(EDS)对等离子弧堆焊Co-Cr-W 系多元合金层进行了研究,结果表明,合金层基体为具有(200)晶面择优取向的 Co 基固溶体,Co 基固溶体中存在许多堆垛层错;与固溶体组成共晶体的碳化物主要为具有六方点阵并含有层片状孪晶的(Cr, Fe)7C3。
6) plasma arc powder surfacing
等离子弧堆焊
1.
The TiB_2 whisker was synthesized in-situ during the reaction of the alloy powders employing the plasma arc powder surfacing.
采用等离子弧堆焊设备,通过钛合金和硼合金粉末之间的高温冶金反应,在堆焊过程中原位合成了TiB2,在普通碳钢表面制备了含TiB2的金属陶瓷层。
补充资料：不敷
1.不足;不够。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条