1) Decay resistance
耐腐性
1.
The decay resistance of Cunninghamia lancelolate thinning wood treated with hot air and hot vegetable oil respectively for different processing time and at different temperature were discussed.
以褐腐菌棉腐卧孔菌为试菌,对分别用热油和热空气为介质,经不同温度、不同时间热处理后的杉木间伐材试样的耐腐性进行了试验,并与质量分数为1。
2.
Decay resistance of rubber wood treated with preservative TWP;
经耐腐性试验测定,用TWP处理的橡胶木属耐腐级,但野外耐腐性较差。
2) corrosion resistance
耐腐蚀性
1.
Study on Corrosion Resistance of Cermet-Steel Cladding Materials;
金属陶瓷—钢覆层材料耐腐蚀性能的研究
2.
Study of corrosion resistance of tower crane steel structure;
塔式起重机镀锌钢结构的耐腐蚀性
3.
Corrosion Resistance of High Al-Zn Base Alloy;
高铝锌基合金的耐腐蚀性研究
3) anti-corrosion
耐腐蚀性
1.
The coating showed not only compact structure and high bonding strength, but also good wear-resistance and anti-corrosion properties.
该涂层组织致密,与基体结合强度高,并且该涂层具有优良的耐磨性能及耐腐蚀性能。
4) anticorrosion
[,æntikə'rəuʒən]
耐腐蚀性
1.
Research on anticorrosion of PPS filter medium in SO_2;
PPS滤料在SO_2气体作用下的耐腐蚀性研究
2.
The Anticorrosion Research of Surface Modification of Pure Titanium and Ti6Al4V by Means of Plasma Ion Implantation Technique;
等离子浸没注入对纯钛及钛合金表面耐腐蚀性能影响的研究
3.
A non\|chromium oxide coating, molybdate\|polymer coating was developed by chemical experiments as well as its anticorrosion and adhesion to aluminum matrix were studied.
传统的空调箔底层处理方式为铬酸盐法 ,本文以化学试验法研究了非铬酸盐处理法和钼酸盐 聚合物复合膜法 ,并测试了该复合膜的耐腐蚀性及其附着力 ,结果表明 ,该膜与铬酸盐膜性能相
5) Corrosion resistant
耐腐蚀性
1.
Structure and corrosion behavior of the high silicon cast iron in several different environments have been tested by means of weight-loss analysis and metallograph,and compare the corrosion resistant of high silicon cast iron with common gray iron and white iron.
采用失重分析、金相分析等试验方法研究了高硅铸铁在不同环境下的耐腐蚀性能,并对高硅铸铁、普通灰铸铁及白口铸铁的耐腐蚀性进行比较。
2.
The corrosion resistant and fire retardant stratified composite slabs were made in in-situ workshop,which included organic covering layer and silicate substrate layer.
耐腐蚀、阻燃和力学性能等测试结果表明,研制的结构复合板具有优良的耐腐蚀性能、阻燃性能和力学性能。
6) erosion resistance
耐腐蚀性
1.
Both the choice of tower material and tower packings an d the erosion resistance were investigated systematically.
对 5 ,5 二甲基海因的连续合成方法中采用的塔式反应器及塔填料材质的选择及其耐腐蚀性进行了深入探讨。
2.
The effects of surface modification on improving wear resistance, erosion resistance and biological properties were illuminated.
介绍了新型医用钛合金的研究开发现状 ,分析了医用钛合金存在的主要问题 ,即耐磨性、耐腐蚀性和生物活性有待进一步提高。
补充资料：憸腐
1.邪恶的人。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条