1) corrosion resistance
耐腐蚀性能
1.
Preparation and corrosion resistance of Ni-W-ZrO_2 composite coatings by electrodeposition;
Ni-W-ZrO_2复合镀层的制备及耐腐蚀性能
2.
Effect of microstructure on the corrosion resistance of Zr-Sn-Nb-Fe zirconium alloy;
显微组织对Zr-Sn-Nb-Fe锆合金耐腐蚀性能的影响
3.
Effect of chemical conversion film plus electroless nickel plating on corrosion resistance of magnesium alloy;
化学转化膜上沉积镍对镁合金耐腐蚀性能的影响
2) anti-corrosion property
耐腐蚀性能
1.
To test stainless steel wire rope with different compositions immerged in seawater and to analyze and discuss anti-corrosion property.
对不同成分的不锈钢丝绳进行海水全浸试验,对耐腐蚀性能进行分析和讨论。
2.
Many advantages as the magnesium alloys have, while the strength of the common one exists between 50-70% of the same aluminium alloys of the craftwork preparation, and the anti-corrosion property is very poor.
尽管镁合金有很多优点,但是一般镁合金的强度只有相同工艺制备的铝合金的50～70%之间,其耐腐蚀性能很差。
3.
The composition, structure, contact resistance and anti-corrosion property of the films were investigated.
与原始不锈钢相比,接触电阻降低1个数量级,耐腐蚀性能提高2个数量级。
3) atmospheric corrosion resistance
耐大气腐蚀性能
1.
Via vacuum induction furnace,cyclic wet/dry test,electrochemistry measurement and XRD analysis,the effects of RE on the atmospheric corrosion resistance of B450NbRE steel were studied.
通过真空感应炉模拟实验,结合周期浸润腐蚀实验、电化学实验和X衍射分析,研究稀土对于B450NbRE钢耐大气腐蚀性能的影响作用。
2.
The research progress of weathering steels and the effect of alloying elements on their atmospheric corrosion resistance were summarized in the present paper.
综述了国内外耐大气腐蚀钢 (即耐候钢 )的发展概况及合金元素对其耐大气腐蚀性能的影响和作用机理 ,介绍了目前较先进的Ca -Ni、Ca -Si改性的合金化作用原理和各种耐候钢表面稳定化处理技术和解决措施 ;并展望了我国耐候钢的发展趋势 。
4) corrosion resistance in alkaline solution
耐碱液腐蚀性能
1.
56 alloy with poor cyclic durability in alkaline solution is not for the practical use, because the corrosion resistance in alkaline solution of V3TiNi0.
但合金的耐碱液腐蚀性能差,导致合金循环寿命短达不到应用要求。
5) seawater corrosion resistance property
耐海水腐蚀性能
1.
Effect of intermediate treatment on seawater corrosion resistance property of 17-4PH stainless steel;
调整处理对17-4PH不锈钢耐海水腐蚀性能的影响
6) anticorrosion ability
耐用腐蚀性能
补充资料：辐照腐蚀
辐照腐蚀
radiation corrosion
fuzhoo fUShl辐照腐蚀(radiation corrosion)在辐照的环境中所发生的金属腐蚀。其特征为:(1)金属结构材料受中子、a粒子、电子和下射线等辐照后可导致强度、硬度提高，电阻增加，塑性下降，同时使钢中缺陷增加，组织结构发生变化，后者将会影响金属和合金的耐蚀性。(2)辐照可改变介质的成分，在脱气的电解液中或多或少要积累一些辐照分解产物HZ、H、OH、HZOZ等，它们将影响金属的自然腐蚀电位。对可钝化金属而言，辐照使腐蚀电位移到钝化区时，腐蚀将减少;而移向活性区和过钝化区时，均使腐蚀加速。对非钝化金属而言，辐照往往加速腐蚀。其次，辐照还可改变介质的pH值，从而影响金属的腐蚀行为，其中以铝合金最为明显。(3)在干燥空气中，辐照对铁、铜、低合金钢和锌的腐蚀几乎无影响，但随着空气相对湿度的增加(一般临界湿度为10%一30%)，将大大加速辐照腐蚀。总之，辐照既影响金属的组织和性能，又促使介质的成分发生变化(辐解产物的生成)，而且还会影响金属和介质界面的性质(金属表面膜结构和性能的改变)，从而使辐照腐蚀显得较为复杂。 (吴幼林)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条