Mo-Cu,Mo-Cu,在线英语词典,英文翻译,专业英语

1) Mo-Cu

Mo-Cu

Effect of mechanical alloying on the property of Mo-Cu alloy;

机械合金化对Mo-Cu合金性能的影响

Development of W-Cu and Mo-Cu Composites by MIM;

注射成形W-Cu及Mo-Cu研究进展

Research on Preparation of Mo-Cu Composite Powders by Electroless Copper Plating;

化学镀铜法制备Mo-Cu复合粉体的研究

2) Mo-Cu

钼铜

The preparation of high-density Mo-Cu and W-Ca alloys using infiltration technology were discnssed.

讨论了采用熔渗法制备高密度钨铜和钼铜合金,综合其密度、比热容、热膨胀系数、导热系数等基本数据,比较了合金的热物理性能及其应用上的特点。

3) Mo/Cu

Mo/Cu

POWER INJECTION MOLDING OF Mo/Cu ALLOY FOR ELECTRONIC PACKAGING;

电子封装用注射成形Mo/Cu合金烧结工艺的研究

The results indicated that Mo/Cu composite powders containing 15%-85% Cu could be prepared by electroless copper plating of the Mo powders.

结果表明:采用化学镀的方法可以成功地获得铜含量(质量分数)为15%～85%的Mo/Cu复合粉末,复合粉末中无Cu2O,表面平滑,但有团聚现象;化学镀铜过程中,pH值的临界值为12,随着pH值增加,镀速加快,但是pH值过高会引起甲醛分解,镀液中pH值的最佳范围在12～13之间;随着温度和甲醛含量的升高,镀速加快,镀液稳定性降低,镀液中甲醛含量和温度最佳范围分别为22～26mL/L,60～70℃。

4) Mo/Cu

Mo/Cu复合材料

55% , 60% and 67% Mo/Cu composites for electronic packaging applications were fabricated using patent-squeeze casting technology.

5%,Mo的体积分数分别为55%,60%,67%三种Mo/Cu复合材料,并对其进行了组织观察,结果表明:Mo/cu复合材料组织均匀,没有明显的孔洞和缺陷。

5) Mo/Cu rod

Mo/Cu复合棒

6) Mo-Cu composite powder

Mo-Cu复合粉末

Mo-Cu composite powders were prepared by gelatinization-coreduction method,in which gels were obtained from precursors of(NH4)6Mo7O24.

干凝胶经煅烧、还原后,获得Cu含量为20%(质量分数)的Mo-Cu复合粉末。

参考词条

Mo-Cu-Ni waste Mo-Cu alloy Cu/Mo/Cu composite Cu/Mo/Cu composite Mo/Cu/S cluster Mo-Cu composite powders Mo-Cu composite material Mo-Cu alloys Mo Cu composite Mo-Cu complex Mo/Cu FGM interaction of dietary Mo and Cu Mo-Cu alloy Mo-Cu alloy flake Mo-Cu ore Mo-Cu powder Grasshopper平台化同伦理

补充资料：moisture cure coatings

分子式：
CAS号：

性质：指含NCO端基的聚氨酯预聚物通过与空气中潮气反应生成脲键而固化成膜的潮气固化聚氨酯涂料。既具有聚氨酯涂料的优良性能，又具有单罐装涂料施工方便的特点。此类涂料的附着力、耐腐蚀性和耐化学品性都很好。可用于油罐、油槽内壁防腐涂装，地下工程防腐涂装和公共场所的地板等方面。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。

首页 \| 翻译 \| 影视 \| 论坛 \| 索引 Mo/Cu alloy Mo-Cu alloy Cu/Mo/Cu

1) Mo-Cu Mo-Cu 1. Effect of mechanical alloying on the property of Mo-Cu alloy; 机械合金化对Mo-Cu合金性能的影响 2. Development of W-Cu and Mo-Cu Composites by MIM; 注射成形W-Cu及Mo-Cu研究进展 3. Research on Preparation of Mo-Cu Composite Powders by Electroless Copper Plating; 化学镀铜法制备Mo-Cu复合粉体的研究 2) Mo-Cu 钼铜 1. The preparation of high-density Mo-Cu and W-Ca alloys using infiltration technology were discnssed. 讨论了采用熔渗法制备高密度钨铜和钼铜合金,综合其密度、比热容、热膨胀系数、导热系数等基本数据,比较了合金的热物理性能及其应用上的特点。 3) Mo/Cu Mo/Cu 1. POWER INJECTION MOLDING OF Mo/Cu ALLOY FOR ELECTRONIC PACKAGING; 电子封装用注射成形Mo/Cu合金烧结工艺的研究 2. The results indicated that Mo/Cu composite powders containing 15%-85% Cu could be prepared by electroless copper plating of the Mo powders. 结果表明:采用化学镀的方法可以成功地获得铜含量(质量分数)为15%～85%的Mo/Cu复合粉末,复合粉末中无Cu2O,表面平滑,但有团聚现象;化学镀铜过程中,pH值的临界值为12,随着pH值增加,镀速加快,但是pH值过高会引起甲醛分解,镀液中pH值的最佳范围在12～13之间;随着温度和甲醛含量的升高,镀速加快,镀液稳定性降低,镀液中甲醛含量和温度最佳范围分别为22～26mL/L,60～70℃。 4) Mo/Cu Mo/Cu复合材料 1. 55% , 60% and 67% Mo/Cu composites for electronic packaging applications were fabricated using patent-squeeze casting technology. 5%,Mo的体积分数分别为55%,60%,67%三种Mo/Cu复合材料,并对其进行了组织观察,结果表明:Mo/cu复合材料组织均匀,没有明显的孔洞和缺陷。 5) Mo/Cu rod Mo/Cu复合棒 6) Mo-Cu composite powder Mo-Cu复合粉末 1. Mo-Cu composite powders were prepared by gelatinization-coreduction method,in which gels were obtained from precursors of(NH4)6Mo7O24. 干凝胶经煅烧、还原后,获得Cu含量为20%(质量分数)的Mo-Cu复合粉末。参考词条 Mo-Cu-Ni waste Mo-Cu alloy Cu/Mo/Cu composite Cu/Mo/Cu composite Mo/Cu/S cluster Mo-Cu composite powders Mo-Cu composite material Mo-Cu alloys Mo Cu composite Mo-Cu complex Mo/Cu FGM interaction of dietary Mo and Cu Mo-Cu alloy Mo-Cu alloy flake Mo-Cu ore Mo-Cu powder Grasshopper平台化同伦理补充资料：moisture cure coatings 分子式： CAS号：性质：指含NCO端基的聚氨酯预聚物通过与空气中潮气反应生成脲键而固化成膜的潮气固化聚氨酯涂料。既具有聚氨酯涂料的优良性能，又具有单罐装涂料施工方便的特点。此类涂料的附着力、耐腐蚀性和耐化学品性都很好。可用于油罐、油槽内壁防腐涂装，地下工程防腐涂装和公共场所的地板等方面。说明：补充资料仅用于学习参考，请勿用于其它任何用途。
©2008 dictall.com