1) bismaleimide resin
双马来酰亚胺树脂
1.
Progress of bismaleimide resin used for PCB laminate;
双马来酰亚胺树脂在印制电路板中的应用进展
2.
Research progress of bismaleimide resin modified by allyl compounds
烯丙基化合物改性双马来酰亚胺树脂的研究进展
3.
The basic principle of the toughening and modifying on bismaleimide resin was introduced, the characteristics and the modifying effects of the toughening and modifying with thermoplastic resin, the combination of aromatic diamine and epoxy resin, organic silicone, allyl compounds, cyanate ester resin, the blends of three-dimensional braided carbon and Kevlar fabrics and so on were discussed.
介绍双马来酰亚胺树脂(BMI)增韧改性的基本原理,论述了热塑性树脂增韧改性、芳香族二胺和环氧树脂相结合增韧改性、有机硅增韧改性、烯丙基系列化合物增韧改性、氰酸酯树脂增韧改性、三维编织碳纤维和凯夫拉纤维混合增韧改性等方法的特点与改性效果。
2) bismaleimide
双马来酰亚胺树脂
1.
Study on dissolubility modification of bismaleimide resin/diamine;
双马来酰亚胺树脂/二胺体系溶解性改性研究
2.
Research on Bismaleimide Molecular Composites;
双马来酰亚胺树脂分子复合材料的研究
3.
This paper introduces the synthesis processes of bismaleimide(BMI),especially modification methods of BMI are reviewed.
本文评述了双马来酰亚胺树脂的合成原理及工艺方法 ,并根据树脂的反应特性重点阐明双马来酰亚胺树脂的增韧改性方
3) BMI
双马来酰亚胺树脂
1.
BMI Resin System and Affordable Composite;
QY8911双马来酰亚胺树脂和复合材料低成本
2.
Quartz fibre strengthen Bis maleimide BMI composite material have low to dielectric loss angle, able to bear high temperature, damp and hot, good mechanics performance.
石英纤维增强双马来酰亚胺树脂复合材料具有低介电损耗、耐高温、耐湿热及良好的力学性能。
3.
The cure kinetic model and kinetic parameters of BMI resin for RTM are studied by DSC.
采用DSC方法研究RTM专用双马来酰亚胺树脂的固化动力学模型与固化动力学参数。
4) BMI resin
双马来酰亚胺树脂
1.
The gelation process of BMI resin system was investigated by gelation disk,and the relationship between gel-time vs temperature was obtained.
采用全动态DSC研究了双马来酰亚胺树脂(BMI)体系的固化反应动力学,建立了固化动力学的唯象模型。
2.
Effects of BMI/DBA ratio on morphologies of BMI/DBA/PEI blends and on diameters and distributions of BMI resin microspheres were studied in this paper.
考察了双马来酰亚胺树脂(BMI)/二烯丙基双酚A(DBA)质量比对BMI/DBA/聚醚酰亚胺(PEI)共混体系固化物相结构以及BMI树脂微球的影响。
5) typical BMI
典型双马来酰亚胺树脂
1.
The cure kinetic model of typical BMI resin was studied, and the typical BMI resin has been obtained by copolymerization of bis (4-maleimido-phenyl)methat and o,o-diallylbisphenol-A.
对由二苯甲烷双马来酰亚胺与二烯丙基双酚A体系制得的典型双马来酰亚胺树脂体系的固化动力学模型进行研究,目前国内绝大多数双马来酰亚胺树脂体系都是在此基础上改性得到的。
6) modified bismaleimide resin
改性双马来酰亚胺树脂
1.
The process suitability of manufacturing thick-component using modified bismaleimide resin/carbon fiber (5428/T700) system was discussed.
对一种航空用改性双马来酰亚胺树脂/碳纤维(5428/T700)复合材料体系制造大厚度构件的工艺适宜性进行研究,通过差示扫描量热法研究了5428树脂的固化反应特性,并测量了5428/T700厚板在固化过程中的温度场。
补充资料：N,N′-亚乙基双硬脂酰胺
分子式： C17H35CONHCH2CH2NHCOCl7H35
CAS号：
性质：白色至浅黄色蜡状粉末。相对密度0.98。熔点142～144℃。闪点285℃(开杯)。耐酸碱和水介质。不溶于水和多数有机溶剂。系多功能助剂，多作为聚氯乙烯、聚甲醛、ABS、酚醛树脂、氨基树脂等热塑性和热固性塑料的润滑剂和脱模剂，对聚烯烃等塑料制品还有防粘连、抗静电和颜料分散功能。另外，在金属加工、造纸和涂料工业中亦有重要应用。由硬脂酸与乙二胺反应制得。
CAS号：
性质：白色至浅黄色蜡状粉末。相对密度0.98。熔点142～144℃。闪点285℃(开杯)。耐酸碱和水介质。不溶于水和多数有机溶剂。系多功能助剂，多作为聚氯乙烯、聚甲醛、ABS、酚醛树脂、氨基树脂等热塑性和热固性塑料的润滑剂和脱模剂，对聚烯烃等塑料制品还有防粘连、抗静电和颜料分散功能。另外，在金属加工、造纸和涂料工业中亦有重要应用。由硬脂酸与乙二胺反应制得。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条