1) workpiece
[英]['wə:k,pi:s] [美]['wɝk,pis]
工件
1.
Unified Theory of Measurement Method for Surface Profile Error of Workpiece Generalized Helix Surface;
广义螺旋曲面工件轮廓度统一测量方法
2.
Analysis of Craze and Transfiguration of the Workpiece Under Wire-cutting and Pr eventive Measures;
线切割时工件的开裂变形分析及预防措施
2) work piece
工件
1.
The working platform is not installed at the center of the worktable, so it can machine larger work piece instantly by rotation, through this way, the scope of the machine is increased and the work is more efficient.
设计了一种可增大小型数控铣床加工范围的旋转工艺定位平台,它是通过其底部的T形凸块与机床最外边一条的T形槽定位并固定在机床的工作台上,通过手动可旋转90°、180°、270°、360°,由于工作平台不是安装在机床工作台的中心位置,这样通过这种旋转可以不用装拆就加工较大的工件,且减少找正工件和对刀的大量辅助时间,提高工作效率,增大机床的加工范围。
2.
The paper is to explain why work piece will cause distortion in quenching treatment, to analyze six most factors of work piece distortion caused in heat treatment.
本文阐述了在淬火处理中工件变形原因,分析了工件在热处理过程中引起变形的六个主要因素。
3) job
[英][dʒəub] [美][dʒob]
工件
1.
Under a given _job sequence, properties on optimal resource allocation are discussed.
第二章针对工件交货期可控的排序问题(P1),分别研究了两种情形: 1｜d_j(Δ) = d_j +β_jΔ｜L_(max) + eΔ和1｜d_j(Δ) = d_j +β_jΔ｜∑U_j + eΔ,给出了这两个问题的最优算法。
2.
Firstly,under the circumstance of unrelated parallel machines,aiming to the uncertainty of job processing time and due date,based on the concepts of the possibility and necessity measures,the tardiness credibility index of job was proposed,which was employed to estimate the possibility of job tardiness.
首先,在变速并行机生产环境下,针对工件加工时间和交货期的不确定性,基于可能性测度和必然性测度的定义,提出了工件拖期可信度指标,用于衡量工件发生拖期的可能性;然后,基于工件拖期可信度指标,建立了以最小化工件平均拖期可信度为目标的混合整数规划模型,通过分析该调度模型,得到最优模糊调度的相关性质;最后,以上述工作为基础,给出一种混合模糊遗传算法的求解方法,并以某电机制造企业为例,对所提出的算法进行了有效性验证。
4) workpieces
工件
1.
The Ablution Technology of Penetration Inspection for Workpieces of Canned Motors;
屏蔽电动机工件渗透探伤清洗技术
2.
This paper dealed with image data acquisition for automatic inspection of surface cracks of workpieces.
简要介绍了工件表面裂纹自动检测的图象采集方法。
5) part
[英][pɑ:t] [美][pɑrt]
工件
1.
The reason for normal elastic trippers easily cause parts embedded in discarded material is analyzed.
分析了常见的弹性卸料装置模具易使工件嵌入废料的原因,同时重新设计了弹性卸料装置来防止工件嵌入废料,且起到了良好的效果。
2.
The reason for normal elastic trippers which easily cause parts embedded in discarded material is analyzed.
对常见的上出料的弹性卸料装置模具容易使工件嵌入废料的原因进行了分析,同时重新设计了弹性卸料装置来防止工件嵌入废料。
补充资料：工件
| 工件 work piece 机械加工中的加工对象。也叫作件或制件。它可以是单个零件，也可以是固定在一起的几个零件的组合体。 |
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条