1) suction nozzle of paper-feeding mechanism
递纸吸嘴机构
1.
According the technological characteristic and process conditions for suction nozzle of paper-feeding mechanism,a kind of design method of conjugate cams was established for high speed paper feeding,by choosing or designing motion law of cam follower.
根据给纸机递纸吸嘴机构的运动特性与工艺条件,给出了适合印刷速度高于15,000印张/h的给纸机递纸吸嘴机构共轭凸轮廓线的设计方法,通过选定或设计从动件运动规律进行共轭凸轮机构设计,这样可以确保凸轮机构具有良好的运动和动力性能;为高性能、高速度的给纸机设计提供了研究基础。
2) forwarding sucker
递纸吸嘴
1.
The optimization design for the locus of the forwarding sucker in a single-sheet feeder is discussed Through theoretical analysis,a mathematical model of optimization design is set-up in which the object function is the minimum deviation between the real locus and the required locus for a given point on the connecting rod.
研究了给纸机递纸吸嘴机构实现轨迹的优化设计问题。
3) Paper-feeding suction mouth assembly
送纸吸嘴机构
4) paper-transferring mechanism
递纸机构
1.
Design of eccentric rotating conjugate cams paper-transferring mechanism;
偏心旋转式共轭凸轮递纸机构设计
2.
On the basis of the principle of TYM 750 Die Cutting and Foilstamping Press,the mathematical model for the paper-transferring mechanism was constructed.
根据TYM 750烫印模切机递纸机构的工作原理,构建递纸机构的数学分析模型,按照递纸吸嘴的运动轨迹,求出递纸机构中凸轮从动杆的运动规律,利用反转法得到凸轮的廓线。
3.
In order to know the Kinetic characteristic of a paper-transferring mechanism,an experimental device is built.
为了了解递纸机构的动态特性,建立了递纸机构实验台。
5) gripper mechanism
递纸机构
1.
A data reverse design method and the reverse design process downswing gripper mechanism around fixed center are introduced.
针对递纸机构在高速运转下的运动稳定性问题,根据某高速定心下摆式递纸机构图纸上凸轮轮廓的检测数据,完成了共轭凸轮机构从动件运动规律的反求分析,根据分析结果得出正向设计共轭凸轮机构从动件运动规律的工艺要求,应用五次多项式模拟递纸牙运动规律,设计出了满足递纸机构工艺条件的驱动凸轮轮廓线。
2.
This paper presents two methods of analysis of gripper mechanism.
提出模拟分析递纸机构的两种方法，并将实测模型与理论模型进行比较，证明了分析结果的正确性。
3.
By studying gripper mechanism,s dynamic characteristics carefully, promotes a dynamic model of gripper mechanism and makes an optimazation of its part parameters.
通过对印刷机递纸机构动力特性的深入研究，提出了递纸机构分析的动力模型，并对其部分参数进行了优化设计。
6) sheet transfer mechanism
递纸机构
1.
In order to improve the dynamic characteristic of the sheet transfer mechanism,the dynamics model of the intermittent rotary sheet transfer mechanism of the offset press is established by using the discretionization equivalence model,which is carried on this kind of sheet transfer mechanism by using the intermittent rotary sheet transfer mechanism driven by pulley with 5 grooves and 3 g.
单张纸印刷机递纸机构的性能对整机的套准精度有着重要的影响,为了改善高速递纸机构的动态特性,以五槽槽轮三拨销驱动的间歇旋转式递纸机构为例,采用离散化等效模型建立了该递纸机构的动力学模型,在此基础上用拉格朗日方程建立了系统的动力学运动方程。
2.
A stop rotary sheet transfer mechanism consisting of gear,cam and Geneva is designed.
设计出一种由齿轮、凸轮、槽轮组合而成的间歇旋转递纸机构，建立起分析该机构运动的数学模型，并给出了递纸凸轮的理论廓线方程。
3.
Sheet transfer mechanism is a key part of an offset press.
递纸机构是胶印机中的关键部件之一,而偏心摆动式递纸机构在胶印机中的使用非常广泛,其性能的优劣直接影响到印刷速度和质量。
补充资料：叉嘴
1.插嘴。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条