1) high pressure die casting
高压铸造
1.
The temperature and stress fields of a thin-walled magnesium component in high pressure die casting(HPDC) can not be investigated optically but can be performed shown by numerical simulation.
以镁合金航空仪表壳为例,建立三维模型和有限差分模型,通过数值模拟镁合金薄壳在高压铸造过程中的充型温度场、凝固过程温度场及凝固过程应力场。
2) High/Low pressure casting
高(低)压铸造
3) Low Pressure Casting
低压铸造
1.
Realization of Fuzzy-PID in PLC for Low Pressure Casting Control System;
低压铸造控制系统中模糊PID在PLC中的实现
2.
Effects of Processing Parameters on Filling Behavior of Thin-walled Casting in Low Pressure Casting;
工艺参数对低压铸造薄壁件充型能力的影响
3.
Aluminum Alloy Motor Enclosure in Low Pressure Casting;
电动机机座低压铸造工艺
4) Squeezing Casting
挤压铸造
1.
Application of Advanced Squeezing Casting to Aluminum Alloy;
铝合金挤压铸造的工程实践
2.
Application of JSCAST Software to Squeezing Casting;
铸造模拟软件JSCAST在挤压铸造中的应用
3.
Microstructure and Mechanical Properties of BH22 Piston Alloy in Squeezing Casting;
挤压铸造BH122活塞合金的显微组织与力学性能
5) squeeze casting
挤压铸造
1.
Mechanical properties and wear performance of squeeze casting ZA27 alloy;
挤压铸造ZA27合金的力学性能及摩擦磨损性能
2.
Effect of heat treatment on microstructure and properties of TiB_(2P)/6061Al composites fabricated by squeeze casting;
热处理对挤压铸造TiB_(2P)/6061Al复合材料组织与性能的影响
3.
Ambient mechanical properties of TiB_(2P)/Al composites by squeeze casting;
挤压铸造TiB_(2P)/Al复合材料室温力学性能
6) low-pressure casting
低压铸造
1.
Numerical simulation on filling and solidification process of low-pressure casting;
低压铸造充型与凝固过程数值模拟
2.
Based on the requirements of low-pressure casting production,the plaster mould manufacture and drying technology,alloy melting and pouring technology were researched to provide science basis for the production of shell blade and heavy shell aluminum alloy castings.
基于低压铸造生产要求,对石膏型制备与烘干工艺、合金熔炼与浇注工艺进行研究,旨在为薄壁叶片和大型复杂薄壁铸造铝合金铸件的生产提供科学依据。
3.
According to the theory of low-pressure casting,the technical parameters of the gating system were ascertained.
基于低压铸造的基础理论,确定出了低压铸造浇注工艺参数,并根据低压铸造工艺设计流程,以Windows 2000和AutoCAD作为支撑软件和系统平台,采用Visual C++等软件作为开发工具,成功开发了低压铸造加压规范的程序,并绘制了加压工艺规范曲线;同时,在低压铸造工艺设计中进行了浇注系统模块的开发。
补充资料:高压线走廊(高压架空线路走廊)
在计算导线最大风偏和安全距离情况下,35kV及以上高压架空电力线路两边导线向外侧延伸一定距离所形成的两条平行线之间的专用通道。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条