1) grinding
[英]['ɡraɪndɪŋ] [美]['graɪndɪŋ]
磨削加工
1.
Cylindrical Grinding Using Step Drill and Its Technological Improvement;
阶梯钻的外圆磨削加工及工艺改进
2.
Study of Virtual Simulation of Grinding of Digital Gear Tooth Surface;
数字化齿面磨削加工虚拟仿真研究
3.
Effect of Grinding on Square Degree of Demagnetization Curve of Cylinder Nd-Fe-B Permanent Magnet Alloy;
磨削加工对圆柱钕铁硼永磁合金退磁曲线隆起度的影响
2) Grinding Process
磨削加工
1.
Progress on the Modeling of Grinding Process;
磨削加工过程建模的研究进展
2.
With the continuous application of ultra-hard high speed steel and other materials hard to be machined in tool industry,higher requirements have been put foward to the grinding process for tools.
随着超硬含铝高速钢及其他难加工材料在工具行业的不断应用,对刀具的磨削加工提出了更高的要求。
3.
Grinding is a complicated process, to avoid researching the complicate d grinding hardening process in mechanism, we investigated grinding process usin g BP arithmetic and developed a simulation software using improved BP arithmetic .
由于磨削加工过程非常复杂,为了避免从机理上研究磨削淬火加工技术,作者将BP网络的仿真方法引入到磨削加工的研究中来,并编制了一套磨削加工仿真程序。
3) grinding machining
磨削加工
1.
The results show that the fracture for the spring results from intergranular crack strips induced by hydrogen on the subsurface because of an inappropriate grinding machining.
结果表明，此批弹簧断裂是由磨削加工不当在磨剂端面下亚表层产生了氢致沿晶开裂带，弹簧服役承载时在正应力的作用下发生了氢滞后脆性断裂。
2.
Ultra-high speed grinding machining technology is a synthetic high and new grinding machining technology,it has many advantages that can not be substituted by traditional grinding machining technology and widely applying prospect.
超高速磨削加工技术是一项综合性的高新磨削加工技术,具有传统的磨削加工技术不可替代的诸多优点,拥有光明的市场前景。
6) Grindability
[,ɡraində'biliti]
磨削加工性
1.
Grindability Evaluation of Ceramics with Directed Graph of Analytical Grey Incidence Process;
基于灰关联分析的有向图法评价陶瓷材料的磨削加工性
2.
A Comprehensive Evaluation Method for Grindability of Ceramic Materials;
一种陶瓷材料磨削加工性的综合评判方法
3.
Digraph and matrix methods for the grindability evaluation of engineering ceramics;
工程陶瓷磨削加工性评价的有向图和矩阵法
补充资料：磨削加工
分子式：
CAS号：
性质：用砂带或砂轮除去塑料制品废边或清除某些缺陷的方法。此外，也常用来磨平制品表面或粗化表面，磨出斜角或圆角，制作斜面或修改尺寸等。热塑性塑料制品用砂带居多，操作时可用干磨或湿磨；热固性塑料制品砂带、砂轮均用，而以干磨为主。
CAS号：
性质：用砂带或砂轮除去塑料制品废边或清除某些缺陷的方法。此外，也常用来磨平制品表面或粗化表面，磨出斜角或圆角，制作斜面或修改尺寸等。热塑性塑料制品用砂带居多，操作时可用干磨或湿磨；热固性塑料制品砂带、砂轮均用，而以干磨为主。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条