说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 螺旋板壳式换热器
1)  helical plate heat exchanger
螺旋板壳式换热器
2)  spiral plate heat exchanger
螺旋板式换热器
1.
Researches on the Heat Transfer Characteristics of the Spiral Plate Heat Exchangers with Non-Circular Pin Fins
椭圆形定距柱螺旋板式换热器的传热特性研究
2.
Application of spiral plate heat exchanger in visbreaker and FCC unit
螺旋板式换热器在减黏裂化和FCC装置上的应用
3.
The difference of heat transfer calculation between spiral plate heat exchanger and single shell and tube (type1 1) heat exchange is discussed herein.
讨论了螺旋板式换热器在传热计算中同单壳程单管程(1-1型)换热器在概念上的不同点。
3)  spiral heat exchanger
螺旋板式换热器
1.
A self-made stainless steel spiral heat exchanger (50 m2) had been applied in the preheating procedure for matured mash for three years.
自制了1台50m2的不锈钢螺旋板式换热器作为蒸馏工艺的发酵成熟醪二次预热器,经3年的生产实践检验,该设备能使粗塔进醪温度达到75~95℃,提高蒸馏生产能力15%~20%。
2.
For the spin of inner part in the reactor during producing, it was considered that the spin occurred mostly by reason of the moment of force on the side of the spiral heat exchanger and the change of angular momentum caused by the change of fluid's flow in the spiral passage, according to the analysis of angular momentum and effect of force on the inne.
本文针对合成塔内件的旋转问题,通过对合成塔内件的受力情况以及系统角动量变化的分析,认为其内件的旋转主要是该内件底部的螺旋板式换热器侧面流体推力及通道内流体流量变化引起的流体角动量变化造成的。
4)  new type helical plate heat exchanger
新型螺旋板式换热器
5)  detachable spiral heat exchanger
可拆式螺旋板换热器
1.
Relying on its excellent strength and stiffness,circular-shaped cover with a topsy-turvy cone is especially suitable for the end sealing of detachable spiral heat exchanger.
倒锥平盖凭借其良好的强度、刚度特性,尤其适于可拆式螺旋板换热器的端部密封。
2.
As a typical compact heat exchanger, although detachable spiral heat exchanger (hereinafter referred to as DSHE) has many advantages: simple structure, convenient manufacturing, high thermal efficiency, low drag ,easy cleaning, etc, its application and dissemination is not satifactory because of the lack of systematic design theory.
可拆式螺旋板换热器(Detachable spiral heat exchanger,简称DSHE)作为一种典型的紧凑式换热器,具有结构简单、制造方便、传热效率高、阻力小、易于清洗检修等诸多优点,但其现有设计因缺少系统的理论指导,影响了其推广应用。
6)  double deflection model spiral shell heat exchanger
双向螺旋板式换热器
1.
Describes the tank, consisting of the newly double deflection model spiral shell heat exchanger-a newly practical national patent.
介绍了实用新型专利产品——新型双向螺旋板式换热器的原理与构造,通过对其样品进行的初步实验研究,证实该产品的高传热性能和实用性,为其推广和制造提供了依据。
补充资料:板壳式换热器
      以板管作为传热元件的换热器,又称薄片换热器。它主要由板管束和壳体两部分组成(图中)。将冷压成形的成对板条的接触处严密地焊接在一起,构成一个包含多个扁平流道的板管(图中)。许多个宽度不等的板管按一定次序排列。为保持板管之间的间距,在相邻板管的两端镶进金属条,并与板管焊在一起。板管两端部便形成管板,从而使许多板管牢固地连接在一起构成板管束。板管束的端面呈现若干扁平的流道 (图中)。板管束装配在壳体内,它与壳体间靠滑动密封消除纵向膨胀差。设备截面一般为圆形,也有矩形、六边形等。A流体在板管内流动,B流体则在壳体内的板管间流动。板壳式换热器是介于管壳式换热器和板式换热器之间的一种结构形式,它兼顾了二者的优点:①以板为传热面,传热效能好。传热系数约为管壳式换热器的 2倍。②结构紧凑,体积小。③耐温、抗压,最高工作温度可达800℃,最高工作压力达 6.3兆帕。④扁平流道中流体高速流动,且板面平滑,不易结垢,板束可拆出,清洗也方便。但这种换热器制造工艺较管壳式换热器复杂,焊接量大且要求高,因而它的推广应用受到一定限制。板壳式换热器用于化工、造纸、制药和食品等工业部门。典型产品主要用于要求传热效能好而停留时间短的食品、医药等加工工业。
  

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条