1) tube
[英][tju:b] [美][tub]
管件
1.
Experimental study of tube ends sizing with electromagnetic bulging;
管件端口电磁校形的实验研究
2.
New Method of Drawing Unfolded Diagram of Tube in Transformer with Computer;
利用计算机绘制变压器管件展开图的新方法
3.
Influence of lubricating condition on tube hydro-forming results;
润滑条件对管件液压成形结果的影响
2) Pipe Fittings
管件
1.
Application of Reinforced polypropylene(FRPP) Tube and Pipe Fittings in the Shell Coal Gasification Unit Design of the Project;
增强聚丙烯(FRPP)管和管件在Shell煤气化装置工程设计中的应用
2.
The forming mechanism of “white spots” during the production of PVC-U pipe fittings and the solutions;
PVC-U管件生产中“白斑”产生的机理及解决办法
3.
The development of special materials for PVC-U pipe fittings;
PVC-U管件专用料的研制
3) pipe fitting
管件
1.
Comparison between bulk polymerization process and suspension polymerization process for the production of PVC resins and the application advantages of PVC produced by bulk polymerization in the production of pipe fittings;
本体法与悬浮法PVC树脂生产工艺的比较及在管件生产中的优势
2.
Discussion on some shortages of national standards of PVC-U water supply and drainage pipes and pipe fittings;
PVC-U给排水管材、管件国家标准中相关不足的商榷
3.
Processing and Application of UHMWPE Pipe Fittings;
超高摩尔质量聚乙烯管件的制备及应用
4) fitting
[英]['fɪtɪŋ] [美]['fɪtɪŋ]
管件
1.
The grain growth behavior of a X70 grade pipeline steel in fitting-manufacture thermal process was studied.
研究结果对于X70级管线钢弯管和三通等管件制造的热加工过程有着重要参考价值。
2.
The deformation law in fitting-manufacture thermal process of an X70 grade pipeline steel was investigated using a Gleeble-1500 tester.
采用Gleeble-1500热／力模拟压缩试验机研究了X70管线钢在管件制造热过程中的形变规律。
3.
The history and present developing situation of electrical melt welded fitting used in buried HDPE water and gas pipe in China is introduced.
介绍了我国HDPE埋地燃气、给水管用电熔管件的发展历史和状况,介绍了电熔管件不同技术的发展状况,特别指出电熔管件目前已经处于供大于求的现状。
5) pipe
[英][paɪp] [美][paɪp]
管件
1.
Mathematic model of pipe intersecting line NC cutting and its automatic programming system development;
管件相贯线数控切割数学模型及其自动编程系统的研发
2.
This paper briefly introduced two methods for anticorrosion of special piece and repaired mouth of long transportation pipeline, i.
简介了长输管道异型管件及补口防腐的两种方法,即高膜厚PU防腐涂料刷涂法和火焰塑料喷涂方法。
3.
With the application and popularization of PVC U pipe many problems influencing its installation quality and service life are found.
为了使这一新材料的应用不断完善 ,就该管道的安装问题提出具体措施和办法 ,对其外观的保护、管与管件承接口的连接、正确使用管件、防止变形等应重点注意的问题作了详细的论
6) fittings
[英]['fitiŋ] [美]['fɪtɪŋ]
配件;管件
补充资料：管件
分子式：
CAS号：
性质： 将管子联接成管路的零件。根据联接方法可分为承插式管件、螺纹管件、法兰管件和焊接管件四类。多用与管子相同的材料制成。有弯头(肘管)、三通管、四通管(十字头)和异径管(大小头)等。弯头用于管搂转弯的地方；三通管用于三根管子汇集的地方；四通管用于四根管子汇集的地方；异径管用于不同管径的两根管子相联接的地方。
CAS号：
性质： 将管子联接成管路的零件。根据联接方法可分为承插式管件、螺纹管件、法兰管件和焊接管件四类。多用与管子相同的材料制成。有弯头(肘管)、三通管、四通管(十字头)和异径管(大小头)等。弯头用于管搂转弯的地方；三通管用于三根管子汇集的地方；四通管用于四根管子汇集的地方；异径管用于不同管径的两根管子相联接的地方。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条