1.
Influence of Strain Rate on Grain Refinement by Plastic Deforming;
应变速率对强塑性变形晶粒细化的影响
2.
Dissolution behavior of second phases in Al-Cu binary alloy during severe plastic deformation
强塑性变形中Al-Cu二元合金相的溶解行为
3.
Improvement on the Severe Plastic Deformation Method and Investigation on the Mechanical Properties of Ultra-Fine Grained Aluminum;
强塑性变形方法的改进及超细晶纯铝应变速率敏感性研究
4.
Plastic Deformation and Strengthening & Toughening of Magnesium Alloy AZ80;
AZ80镁合金的塑性变形与强韧化
5.
Flow Stress of 7050 High Strength Aluminum Alloy during High Temperature Plastic Deformation
7050高强铝合金高温塑性变形的流变应力研究
6.
STUDY ON STRENGTH AND DEFORMATION OF PLASTIC CONCRETE UNDER CYCLIC LOADING AND UNLOADING
循环加卸载下塑性混凝土强度及变形特性
7.
Plastic Formability of Tailor-Welded Blanks for High Strength Steel with Different Thickness and Qualities
不等厚异质高强钢拼焊板塑性变形性能研究
8.
Yielding strength is indicative of the stress at which plastic deformation begins.
屈服强度是指塑性形变开始发生时的应力。
9.
Triaxial Test of Deformation and Strength Change of a Remolded Unsaturated Sand
重塑非饱和含粘砂土变形强度特性的三轴试验
10.
distortion energy plasticity condition
形状变形能塑性条件
11.
element of mechanics of plasticity
塑性变形的力学原理
12.
extrusion stress
(塑性变形的)挤压应力
13.
Study on Plastic Deformation of Al Matrix Composites Reinforced by Al-Fe Intermetallics;
Al-Fe金属间化合物原位增强铝基复合材料塑性变形的研究
14.
Debugging of a New True Triaxial Apparatus and Experimental Study on the Strength-Deformation Characteristics of Remolded Loess;
新型真三轴仪调试及重塑黄土强度变形特性的试验研究
15.
The increase in hardness and strength of a ductile metal as it is plastically deformed below its recrystallization temperature.
塑性材料于再结晶温度以下进行塑性变形引起的硬度和强度升高现象。
16.
It is assumed that plastic deformation stems from the localization of shear strain.
岩样的塑性变形假设根源于塑性应变局部化。
17.
The Intensity and Deformation Analysis of the Plastic Pipe with Steel Frame;
钢骨架增强塑料复合管的强度与变形分析
18.
The plastic deformation on ribs caused by punch push down and skin springback.
筋条的塑性变形既有凸模下压导致的塑性变形,又有蒙皮回弹导致的塑性变形;