1) crystalline structure
晶相结构
1.
Influence of K_2O impurity on the crystalline structure of cordierite synthesized from waste aluminum slag;
K_2O杂质对铝型材厂工业废渣合成的堇青石材料晶相结构的影响
2.
Effects of preparation methods on crystalline structure of Ni-Mo oxide catalysts;
制备方法对Ni-Mo氧化物催化剂晶相结构的影响
3.
Using the technologies such as X-ray diffraction (XRD) and Scanning electron microscope (SEM), the article discussed the influence of the factors such as crystalline structure of standards and samples and their preparation on the analytical result when analyzing silicon dioxide content in organic glass filler ash with X-ray fluorescence spectrometry (XRF
利用X射线衍射(XRD)和扫描电子显微镜(SEM)等分析技术,探讨了用X射线荧光光谱法(XRF)分析有机玻璃填料灰渣中二氧化硅含量时标样和样品晶相结构及样品制备方法等因素对分析结果的影响。
2) crystal structure
晶相结构
1.
Dipping SiC refractory with AlPO4 saturated solution is beneficial to its crystal structure and properties.
浸渍AlPO4饱和溶液有利于SiC耐火材料晶相结构的转化,有利于材料性能的优化。
2.
The changes of crystal structure and properties of ceramic roller during its application in the roller hearth kiln were studied.
采用XRD和SEM方法表征不同位置辊棒的晶相结构与显微结构来探讨陶瓷辊棒在实际窑炉使用过程晶相结构和性能变化。
3.
The effects of PAM and microwave treatment on the morphology,particle size and crystal structure of the material were characterized by SEM,laser particle size analysis and XRD techniques.
通过SEM、激光粒度分析和XRD等技术,研究了PAM和微波处理对材料的形貌、粒度和晶相结构的影响。
3) crystalline phase
晶相结构
1.
X-ray diffraction and scanning electron microscope were used to characterize the crystalline phases and microstructures.
5H2O]为主要原料合成镁铝尖晶石(MgAl2O4),探讨氧化钛(TiO2)矿化剂对合成的MgAl2O4晶相结构、晶胞参数及微观形貌的影响。
2.
X-ray diffraction (XRD) and scanning electron microscopy (SEM) were used to characterize the crystalline phases and microstructures; Rietveld Quantification software was used to calculate the content of each phase.
采用XRD法和SEM法表征各试样的晶相结构和显微结构;用Rietveld Quantification法确定各试样中各晶相的含量;测试各试样的性能。
3.
XRD and SEM were used to characterize the crystalline phases and microstructures.
采用XRD和SEM表征试样的晶相结构和显微结构;用Rietveld Quantification法确定各试样中各晶相含量;测试各试样的性能。
4) crystalline phases
晶相结构
1.
The influence of sintering technique on crystalline phases and microstructures of mullite synthesized;
烧结工艺对合成莫来石晶相结构的影响
2.
X-ray diffraction(XRD) and scanning electron microscopy(SEM) were used to characterize the crystalline phases and microstructures.
采用XRD和SEM等主要测试手段探讨其晶相结构和显微结构,以气孔率、吸水率、体积密度等性能指标为主要评价标准选择最佳的助熔剂添加量。
5) crystal phase structure
晶相结构
1.
Photocatalytized phenol oxidation was used to discuss the effect of calcination temperature on the crystal phase structure of TiO_2 and to show the relationship between the crystal phase structure of TiO_2 and its photocatalytic activity.
采用XRD、TEM、BET和UV-Vis漫反射吸收方法对各种温度焙烧的P-25 TiO2进行了表征,利用光催化降解苯酚的反应,研究了焙烧温度对P-25 TiO2晶相结构的影响以及晶相结构与其光催化活性之间的关系。
2.
The crystal phase structure of EMD heated at different temperatures was studied by XRD.
采用XRD法研究了不同温度下热处理的EMD的晶相结构,并制备成电池测试了开路电压、短路电流、内阻以及恒流和脉冲放电性能。
6) polycrystalline structure
晶相结构
1.
Its chemical composition, their polycrystalline structures and microstructures were characterized by analysis of chemical composition, XRD and SEM and the results can provide us suitable data for its comprehensive applications.
本研究将污泥分别于450℃、600℃、800℃、900℃、1000℃和1200℃进行了煅烧,探讨污泥在不同温度下的晶相变化,采用化学全分析、XRD和SEM表征了污泥的化学组成,在不同温度下的晶相结构和显微结构,为对其进行充分而有效的回收利用提供理论依据。
补充资料：介晶相
分子式：
CAS号：
性质：见液晶相
CAS号：
性质：见液晶相
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条