1) spray pyrolysis
喷雾热解
1.
Spherical(Y,Gd)BO_3:Eu phosphor particles for PDP synthesized by spray pyrolysis method;
喷雾热解法制备PDP用(Y,Gd)BO_3:Eu球形荧光粉
2.
High performance spherical cobalt blue particles prepared by spray pyrolysis;
喷雾热解法合成高性能球形钴蓝的研究
3.
Progress in Li-ion battery cathode materials synthesized by spray pyrolysis method;
喷雾热解法制备锂离子电池正极材料的进展
2) Spray pyrolysis
喷雾热解法
1.
Preparation and characterization of SnO_2∶Sb thin films by spray pyrolysis process;
喷雾热解法制备掺锑二氧化锡薄膜及其性能表征
2.
Transparent TiO_2 thin films were prepared by spray pyrolysis deposition and the crystalline structure and surface morphology of the TiO_2 films obtained were characterized by X-ray diffraction and scanning electron microscope.
用喷雾热解法制备TiO2超亲水薄膜。
3.
Spherical YAG∶Ce~(3+) phosphor particles with narrow size distribution were synthesized by spray pyrolysis.
采用喷雾热解法制备了无团聚的球形YAG∶Ce3+荧光粉。
3) spray pyrolysis
喷雾热分解
1.
Morphology control of micro-sized spherical silver powder prepared by spray pyrolysis;
喷雾热分解法制备超细银粉及其形貌控制
2.
Preparation of La_(0.6)Sr_(0.4)Co_(0.2)Fe_(0.8)O_(3-α) ultra fine powder by spray pyrolysis method and its electrical property;
La_(0.6)Sr_(0.4)Co_(0.2)Fe_(0.8)O_(3-α)超细粉体的喷雾热分解法合成与电性能
3.
Preparation and electric property of fluorine-doped tin oxide thin films by spray pyrolysis process;
喷雾热分解法制备SnO_2·F薄膜与导电性能研究
4) spray pyrolysis method
喷雾热分解法
1.
SnCl4·5H2O as raw material,SnO2 ultrafine particles were prepared by spray pyrolysis method.
5H2O为原料,采用喷雾热分解法制备超细SnO2粉体,结果表明,通过控制反应炉温、前驱体溶液浓度、载气流量,选择合适的添加剂可以有效调控粉体的粒度与形貌。
2.
With SnCl4·5H2O as precusor,SnO2 ultrafine particles were prepared by spray pyrolysis method.
5H2O为前驱体,采用喷雾热分解法制备了超细SnO2粉体,研究了反应温度、前驱体溶液浓度和载气流量等工艺参数对粉体粒径和形貌的影响,并对工艺参数进行了优化。
5) spray pyrolysis
喷雾热分解法
1.
This study used spray pyrolysis process to prepare Yb 2O 3 ultrafine powders.
在此基础上,以Yb(NO3)3·6H2O为前驱体采用喷雾热分解法制备出粒度为050～150μm的单相立方晶系球形Yb2O3粉末。
6) ultrasonic spray pyrolysis
超声喷雾热分解
1.
SnO_2 thin film by ultrasonic spray pyrolysis;
用超声喷雾热分解法制备二氧化锡薄膜
2.
Spherical morphology LiNi_(1/3)Co_(1/3)Mn_(1/3)O_2 as a cathode material of lithium ion batteries was successfully synthesized by an ultrasonic spray pyrolysis method.
采用超声喷雾热分解工艺合成了球形锂离子电池正极材料LiNi_(1/3)Co_(1/3)Mn_(1/3)O_2。
3.
Ag doped ZnO films(ZnO:Ag) were deposited on quartz glass substrates by ultrasonic spray pyrolysis technology.
采用超声喷雾热分解法在石英衬底上以醋酸锌水溶液为前驱体,以硝酸银水溶液为Ag掺杂源生长了Ag掺杂ZnO(ZnO:Ag)薄膜。
补充资料：废物热解
分子式：
CAS号：
性质：是在缺氧或无氧条件下废物的热分解过程。热解温度为500～800℃，比焚烧温度低。有机废物的热解可得到能分离、回收和再利用的气体或液体燃料。另外，由于热解温度相对较低，因此热解过程产生的氮氧化物(NOχ)少，而且尾气排放量也少。目前，发达国家已有城市垃圾、废塑料和废轮胎热解处理的工业化装置，但成功运行的这类工业化装置毕竟还很少，因此从总体来说，废物热解技术尚处在试验性生产的中试阶段。
CAS号：
性质：是在缺氧或无氧条件下废物的热分解过程。热解温度为500～800℃，比焚烧温度低。有机废物的热解可得到能分离、回收和再利用的气体或液体燃料。另外，由于热解温度相对较低，因此热解过程产生的氮氧化物(NOχ)少，而且尾气排放量也少。目前，发达国家已有城市垃圾、废塑料和废轮胎热解处理的工业化装置，但成功运行的这类工业化装置毕竟还很少，因此从总体来说，废物热解技术尚处在试验性生产的中试阶段。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条