1) conductive fiber
导电纤维
1.
Application property of organic conductive fiber blended with wool;
有机导电纤维与羊毛混纺应用性能研究
2.
The structures and characters of polyphenylamine/polypropylene conductive fiber;
聚苯胺/聚丙烯导电纤维的结构与性能
3.
Study on structure and properties of polyester/carbon nanotube conductive fiber;
聚酯/碳纳米管导电纤维结构与性能的研究
2) conducting fiber
导电纤维
1.
The effects of different contents of conducting master batch on the electrical resistivity,mechanical properties,weight reduction ratio after washing,crystallinity and dyeing properties of the conducting fiber were studied.
研究导电母粒质量分数对纤维电阻率的影响以及导电纤维的力学性能、水洗失重率、结晶度和染色性能等,探讨纤维的结构和导电机制。
2.
Problem of worsted fabric with much charge has been solved by using conducting fiber.
通过对羊毛、蚕丝、山羊绒三种天然蛋白质纤维性能的分析,认为这三种纤维有机组合,可突出其各自的优点;导电纤维的加入,解决了精纺面料静电大、吸尘贴身的弊病,产品穿着更加自如舒适,使面料达到舒适化、功能化、时尚化的效果。
3.
Broadband radar absorbing materials were prepared by blending modified poly(vinyl chloride) with complex absorbers including regular powder absorbers and conducting fibers.
采用常规粉体吸收剂和导电纤维作为复合吸收剂,掺混于改性聚氯乙烯基体中,制备出宽频雷达吸波材料。
3) conductive fibers
导电纤维
1.
Influences of conductive fibers in different blending ratio on yarn conductive properties;
不同比例的导电纤维对纱线导电性能的影响
2.
The uses and varieties of conductive fibers, and the key process of producing conductive composition fibers were introduced in this paper.
概述了导电纤维的用途、种类以及复合型导电纤维制备的关键技术等。
3.
In this paper metallized conductive fibers are discussed on their conductive theory,producedmethods,applied fields and development.
本文综述了金属化导电纤维的导电原理、制备方法、应用领域及发展概况。
4) electrically conductive fiber
导电纤维
1.
Preparation and characterization of carbon black coated polyester electrically conductive fiber;
碳黑涂覆型聚酯导电纤维的制备与性能
2.
In this paper,the present developmental status of electrically conductive fiber is introduced comprehensively.
本文综述了导电纤维的发展状况 ,并对日本工作服面料进行了测试分析 ,重点讨论了导电纤维在消除静电方面的应用 ,提出了产品开发的方向 。
3.
On the basis of design a kind of electrically conductive master batch (ECMB) with a lower percolation threshold concentration and bring forward a new kind of new coating method (dissolving-coating method), poly(ethylene terephthalate) (PET) and polycaprolactam (PA6) electrically conductive fibers were prepared by melt-spun and dissolving-coating method, respectively.
在熔融共混制备碳黑/聚酯导电纤维中,首先研究了碳黑含量、偶联剂处理、分散剂用量以及基体树脂组成等对碳黑/聚酯母粒导电性能和渗流阈值的影响。
5) short conductive fiber
短导电纤维
1.
According to electromagnetic spreading regulation and transmission line theory,a kind of light wideband three-layered radar absorbing coating with magnetic metal powder and short conductive fiber were prepared.
在磁性金属微粉的雷达吸波涂层中引入导电纤维层具有减轻质量和展宽吸收频带作用,本文采用磁性金属微粉和短导电纤维制备了一种三层雷达吸波材料。
补充资料：导电纤维
分子式：
CAS号：
性质：指电阻率小于105Ω·cm的纤维，有三类。(1)有机导电纤维，电阻率为102～104Ω·cm，主要采用复合纺丝法将高浓度的导电微粒局部混入纤维中制取，黑系导电微粒用炭黑，白系用金属氧化物如含少量氧化锡的氧化锑表面上涂覆二氧化钛，纤维相对较轻，有可挠性，可洗和便于加工；也可通过后加工化学固着铜化物或电镀金属。(2)金属纤维。(3)碳纤维，碳化温度愈高，模量与导电性愈高，若在其上进一步沉积石墨并用硝酸处理，可制得导电率达到金属水平的纤维。
CAS号：
性质：指电阻率小于105Ω·cm的纤维，有三类。(1)有机导电纤维，电阻率为102～104Ω·cm，主要采用复合纺丝法将高浓度的导电微粒局部混入纤维中制取，黑系导电微粒用炭黑，白系用金属氧化物如含少量氧化锡的氧化锑表面上涂覆二氧化钛，纤维相对较轻，有可挠性，可洗和便于加工；也可通过后加工化学固着铜化物或电镀金属。(2)金属纤维。(3)碳纤维，碳化温度愈高，模量与导电性愈高，若在其上进一步沉积石墨并用硝酸处理，可制得导电率达到金属水平的纤维。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条