1) nylon 1010
尼龙1010
1.
The preparation of high flexibility nylon 1010 materials;
高柔韧性尼龙1010材料的制备
2.
Design of Injection Molding Technology of Nylon 1010 Product;
尼龙1010注塑制品工艺设计
3.
On the properties of nylon 1010/nanometer TiO_2 coatings by flame spraying;
火焰喷涂尼龙1010/纳米TiO_2复合涂层力学性能研究
2) Nylon1010
尼龙1010
1.
Tribological Behavior of Nylon1010/n-SiO_2 Composite Coatings;
尼龙1010/n-SiO_2复合涂层摩擦学性能研究
2.
Supercritical CO_2 Assisted Preparation of Polystyrene/ nylon1010 Blend and Its Crystalline Morphology;
超临界CO_2辅助制备聚苯乙烯/尼龙1010共混物及其结晶形态
3.
Functionalization of PP and Its Compatibility with Nylon1010;
聚丙烯的官能化及与尼龙1010相容性研究
3) PA1010
尼龙1010
1.
MECHANICAL PROPERTIES OF FLAME SPRAYED PA1010 /n-ZrO_2 COMPOSITE COATING;
火焰喷涂尼龙1010/n-ZrO_2复合涂层的力学性能
2.
Tribological Properties of PA1010 Irradiated with Gamma Radiation;
γ射线辐照尼龙1010的磨擦学特性
3.
CHAIN EXTENSION OF PA1010 BY BISOXAZOLINES;
双噁唑啉扩链尼龙1010
4) polyamide 1010
尼龙1010
1.
The Study on Flame-Retardant Polyamide 1010;
阻燃尼龙1010的研究
2.
With polyamide 1010(PA1010) as matrix material and with ester-based thermoplastic polyurethane elastomer (TPU) as toughener,PA1010/TPU blends were prepared using a Haake PTW16/25p twin-screw extruder.
以尼龙1010(PA1010)为基体,以聚酯型热塑性聚氨酯弹性体(TPU)为增韧剂,采用HaakePTW16/25p型双螺杆挤出机制备了PA1010/TPU共混增韧尼龙材料,测试了PA1010/TPU共混物的表观粘度、非牛顿指数等流变参数,并重点讨论了其流变性能。
3.
In the process of internal friction measurement of polyamide 1010 (PAlOlO)and its blends with bisphenol A polycarbonate (PC) ,it was found that the relaxation temperatures bore close relation to the starting temperature for measurement.
本工作对尼龙1010(PA1010)及其与双酚A型聚碳酸酯(PC)的共混物进行了内耗测量,发现它们的内耗峰温与测量起始温度有密切联系。
5) PA1010/6
尼龙1010/6
1.
Mechanical Properties of Water Saturated PA1010/6;
水分对尼龙1010/6力学性能的影响
2.
Studies on the relations between the mechanical properties and the compositioin of PA1010/6 copolymer;
尼龙1010/6力学性能与组成关系研究
6) nylon-1010
尼龙-1010
1.
Viscometric determination of compatibility in PPTA/nylon-1010 molecular composite;
粘度法测试PPTA/尼龙-1010分子复合材料组分间相容性
补充资料：尼龙1010
[-NH（CH2）10－NHCO(CH2)8CO]n－
白色或微黄色半透明均匀颗粒，半透明结晶形热塑性聚合物。密度1．058／cm3。吸水率1．5％。脆化温度-60℃。热分解温度大于350℃。易溶于苯酚、甲酚、硫酸等极性溶剂。对于烃、脂、低级醇等大部分非极性溶剂稳定。具有自润滑性、高耐磨性及良好的消音性。吸水性小，介电稳定性好。
密度(g/cm3) 1.03-1.05
拉伸强度 (MPa) >50
断裂强度 (％) >100
弯曲强度 (MPa) >70
冲击强度(kJ／m2) >250
熔点 (℃) 195-210
应用领域 代替金属及有色金属广泛用于机械、汽车、化工等领域，可制作各种机械零件、衬垫、管道，如齿轮、轴承保持架、轴套、汽车十字节衬套底盘、涡杆、涡轮、高压阀衬垫、油箱衬里、输油管等。亦可用作电缆保护层、医用薄膜、乳胶管、容器、滤布、筛网、毛刷、金属表面防腐涂层、耐磨涂层等。还可加入其他树脂中作改性剂。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条