1) FR Polyamide 1010
阻燃尼龙1010
2) nylon 1010
尼龙1010
1.
The preparation of high flexibility nylon 1010 materials;
高柔韧性尼龙1010材料的制备
2.
Design of Injection Molding Technology of Nylon 1010 Product;
尼龙1010注塑制品工艺设计
3.
On the properties of nylon 1010/nanometer TiO_2 coatings by flame spraying;
火焰喷涂尼龙1010/纳米TiO_2复合涂层力学性能研究
3) Nylon1010
尼龙1010
1.
Tribological Behavior of Nylon1010/n-SiO_2 Composite Coatings;
尼龙1010/n-SiO_2复合涂层摩擦学性能研究
2.
Supercritical CO_2 Assisted Preparation of Polystyrene/ nylon1010 Blend and Its Crystalline Morphology;
超临界CO_2辅助制备聚苯乙烯/尼龙1010共混物及其结晶形态
3.
Functionalization of PP and Its Compatibility with Nylon1010;
聚丙烯的官能化及与尼龙1010相容性研究
4) PA1010
尼龙1010
1.
MECHANICAL PROPERTIES OF FLAME SPRAYED PA1010 /n-ZrO_2 COMPOSITE COATING;
火焰喷涂尼龙1010/n-ZrO_2复合涂层的力学性能
2.
Tribological Properties of PA1010 Irradiated with Gamma Radiation;
γ射线辐照尼龙1010的磨擦学特性
3.
CHAIN EXTENSION OF PA1010 BY BISOXAZOLINES;
双噁唑啉扩链尼龙1010
5) PA1010/6
尼龙1010/6
1.
Mechanical Properties of Water Saturated PA1010/6;
水分对尼龙1010/6力学性能的影响
2.
Studies on the relations between the mechanical properties and the compositioin of PA1010/6 copolymer;
尼龙1010/6力学性能与组成关系研究
6) polyamide 1010
尼龙1010
1.
The Study on Flame-Retardant Polyamide 1010;
阻燃尼龙1010的研究
2.
With polyamide 1010(PA1010) as matrix material and with ester-based thermoplastic polyurethane elastomer (TPU) as toughener,PA1010/TPU blends were prepared using a Haake PTW16/25p twin-screw extruder.
以尼龙1010(PA1010)为基体,以聚酯型热塑性聚氨酯弹性体(TPU)为增韧剂,采用HaakePTW16/25p型双螺杆挤出机制备了PA1010/TPU共混增韧尼龙材料,测试了PA1010/TPU共混物的表观粘度、非牛顿指数等流变参数,并重点讨论了其流变性能。
3.
In the process of internal friction measurement of polyamide 1010 (PAlOlO)and its blends with bisphenol A polycarbonate (PC) ,it was found that the relaxation temperatures bore close relation to the starting temperature for measurement.
本工作对尼龙1010(PA1010)及其与双酚A型聚碳酸酯(PC)的共混物进行了内耗测量,发现它们的内耗峰温与测量起始温度有密切联系。
补充资料：阻燃尼龙
分子式：
CAS号：
性质：以尼龙类树脂为基料，添加阻燃剂和阻燃助剂，经挤出机混炼挤出制得的塑料。其强度与相应尼龙相近，但阻燃性更好(UL94 V-0)，可供选择的阻燃剂有磷系、溴系和氮系阻燃剂，助阻燃剂有三氧化二锑、氧化锌等。加工方法与一般尼龙相似，主要用于注塑。主要品种有阻燃尼龙6和阻燃尼龙66。用于电力、煤炭、电器电子、汽车行业制造阻燃壳体，零部件、输送带等。
CAS号：
性质：以尼龙类树脂为基料，添加阻燃剂和阻燃助剂，经挤出机混炼挤出制得的塑料。其强度与相应尼龙相近，但阻燃性更好(UL94 V-0)，可供选择的阻燃剂有磷系、溴系和氮系阻燃剂，助阻燃剂有三氧化二锑、氧化锌等。加工方法与一般尼龙相似，主要用于注塑。主要品种有阻燃尼龙6和阻燃尼龙66。用于电力、煤炭、电器电子、汽车行业制造阻燃壳体，零部件、输送带等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条